Author Topic: Another newbie question: DA & SA - real definitions, ple  (Read 452 times)

0 Members and 1 Guest are viewing this topic.

Offline Ranald

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
    • http://www.ranopt.net
Another newbie question: DA & SA - real definitions, ple
« on: August 27, 2003, 04:18:12 PM »
Time for another dumb question - so please bear with me.

I'm told Double Action means being able to cock the hammer by two methods:  trigger(1) and slide or hammer bob(2).  Then again, I'm told it means cocking the hammer(1) and then releasing the sear(2) via the trigger  pull.  

OK, so which is it?

Thanks!

Ran

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Another newbie question: DA & SA - real
« Reply #1 on: August 27, 2003, 05:33:22 PM »
Single action means that you have to cock the pistol before it can fire. Double action means thet it can be cocked and fired or fired simply by pulling the trigger. But there are some variations. Some pistols are considered to be double action only which means you can not cock the hammer, you can only fire by a full pull of the trigger. To me thats not really "Double Action", but thats what its called. Hows that for muddying up the water?  KN

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Another newbie question: DA & SA - real
« Reply #2 on: August 27, 2003, 11:48:05 PM »
As it was explained to me Single action means the the trigger only performs one action-firing.

Double action means the trigger performs two actions- cocking and firing.

This explanation was given to me by my Marine Master Gunnery SGT, shooting coach so it must be right.  I know I wasn't going disagree. He didn't like that.  :?

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
SA/DA/DAO
« Reply #3 on: August 28, 2003, 04:58:52 AM »
Revolvers:  Single action means you have to cock the hammer before you can fire the revolver by pulling the trigger.

Double Action gives you the option of (1) cocking the hammer back before firing the revolver by pulling the trigger or (2) firing the revolver by pulling the trigger all the way to the rear so it cocks the hammer back and releases it by it's own design thereby firing the revolver.

Double action only means only firing the revolver by pulling the trigger back all the way to the rear so it cocks the hammer (usually an internal, not exposed or external hammer) and then releases it by its own design thereby firing the weapon.

Single action semi-auto means cocking the hammer back for the first shot and pulling the trigger, releasing the hammer thereby firing the weapon and the cycling of the action automatically cocks the hammer back for following shots.

Double action only semi-autos function in a manner similar to double action only revolvers, in that although the cycling of the action ejects the spent cartridge and then chambers a fresh cartridge, the hammer does not cock back as it does with a single action only semi-auto but returns to a 'safe' position in which the weapon can only be fired by pulling the trigger all the way to the rear as with the first shot.

Hope this helps.  Mikey.

Offline Ranald

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
    • http://www.ranopt.net
Another newbie question: DA & SA - real
« Reply #4 on: August 28, 2003, 03:42:27 PM »
Thank you, gents!!  You've helped quite a bit.  That puts things in perspective for me.

Cheers!

Ran