« previous next »
Pages: [1]   Go Down

Author Topic: 9mm or 40s&w  (Read 2199 times)

0 Members and 1 Guest are viewing this topic.

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
9mm or 40s&w
« on: March 12, 2009, 05:48:49 AM »
I am thinking about buying a Hi Point pistol.
Most of the time it will be in my glove box for protection.
I will do a lot of plinking with it also.
Witch one is nicest to shoot?
Will the 40 fit in the upper glove box of my 2008 Silverado?
Logged

Offline jls

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
  • Gender: Male
Re: 9mm or 40s&w
« Reply #1 on: March 12, 2009, 11:59:02 AM »
Wellll, I dont own a  chevy but my .40 fits in my olds aurora center console and the door pocket in my buick rendevous. the 9mm will have less recoil but the .40 spits a bigger payload. I'd be content with either with the right load. ;)
Logged
Deceased due to a 3rd stroke on Dec. 12, 2011.

RIP John.

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: 9mm or 40s&w
« Reply #2 on: March 13, 2009, 07:20:51 AM »
I know the 40 has more power but it's a bigger heavier gun too. Right?
Has anybody shot both?

I wold like the power for defense/hunting but it's main use will be plinking.
Logged

Offline jls

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
  • Gender: Male
Re: 9mm or 40s&w
« Reply #3 on: March 13, 2009, 07:56:35 AM »
Yup, bigger, heavier, ugly as sin. my wife shoots the 9mm. and she uses it to punch paper and the wayward varmit once in awhile. I'd probably go with the 9mm. for what you're needing. :)
Logged
Deceased due to a 3rd stroke on Dec. 12, 2011.

RIP John.

Offline jdwolf

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 290
  • Gender: Male
Re: 9mm or 40s&w
« Reply #4 on: March 14, 2009, 02:54:23 AM »
Quote from: PartsMan on March 12, 2009, 05:48:49 AM
I am thinking about buying a Hi Point pistol.
Most of the time it will be in my glove box for protection.
I will do a lot of plinking with it also.
Witch one is nicest to shoot?
Will the 40 fit in the upper glove box of my 2008 Silverado?
  For what you'll be using it for I'd go with the C9 9mm pistol.  With the right load ( a good hollow point) it will make an excellent personal defense weapon and 9mm target ammo is much cheaper than the 40 caliber for plinking/target shooting.  Regardless of which caliber you get,  you'll be amazed at how accurate and reliable Hi Point pistols are.  You won't be sorry you bought it.  ;D
Logged
Help support concealed carry in Illinois,  show your support.  http://www.cafepress.com/sicc

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: 9mm or 40s&w
« Reply #5 on: March 16, 2009, 04:52:42 AM »
What's the closest place to Enid, OK that I can handle one?
Logged

Offline jls

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
  • Gender: Male
Re: 9mm or 40s&w
« Reply #6 on: March 16, 2009, 10:42:21 AM »
I can't help you there. I live in CO. and bought all my Hi-points at Big R. Sorry, maybe a Big R or Sportsmans Warehouse in your neck of the woods??
Logged
Deceased due to a 3rd stroke on Dec. 12, 2011.

RIP John.

Offline jdwolf

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 290
  • Gender: Male
Re: 9mm or 40s&w
« Reply #7 on: March 17, 2009, 12:16:41 PM »
Quote from: PartsMan on March 16, 2009, 04:52:42 AM
What's the closest place to Enid, OK that I can handle one?
Ask a local gun shop in your area if they can order A Hi Point for you.  If not,  go to gunbroker.com to buy one and have it shipped to an FFL in your area. 
Logged
Help support concealed carry in Illinois,  show your support.  http://www.cafepress.com/sicc

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: 9mm or 40s&w
« Reply #8 on: March 18, 2009, 05:57:51 AM »
Quote from: jdwolf on March 17, 2009, 12:16:41 PM
Quote from: PartsMan on March 16, 2009, 04:52:42 AM
What's the closest place to Enid, OK that I can handle one?
Ask a local gun shop in your area if they can order A Hi Point for you.  If not,  go to gunbroker.com to buy one and have it shipped to an FFL in your area. 

"No we don't sell cheap junk"
"Sure we'll receive it for $100"

There is a local dealer listed but the address is a house out in the country???
I guess I should call the number but it sounds kind of shady to me.
Logged

Offline jeff1hd

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Re: 9mm or 40s&w
« Reply #9 on: March 19, 2009, 09:41:34 AM »
I have the 9mm great gun never had a problem with it
Logged

Offline pills

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 421
Re: 9mm or 40s&w
« Reply #10 on: March 24, 2009, 08:25:30 PM »
I have both. For my larger hands I like the 40. Also I like the fact that the mags easily interchange between it and the 4095 carbine. I also like the bigger round and the 10 rd magazine
Logged
...You do not open your mouth without all the facts period...

Matt

Remember this, my dear brothers and sisters: Everyone should be quick to listen, slow to speak, and should not get angry easily. James 1:19

Offline skifastchad

  • GBO Supporter
  • Trade Count: (17)
  • Contributor
  • *****
  • Posts: 332
Re: 9mm or 40s&w
« Reply #11 on: April 14, 2009, 09:59:46 AM »
Quote from: PartsMan on March 18, 2009, 05:57:51 AM
There is a local dealer listed but the address is a house out in the country???
I guess I should call the number but it sounds kind of shady to me.

Those are usually the most honest helpful gun shops. 
For what a FFL costs these days and the hoops that have to be jumped through, it can't be that shady.
Logged

Offline handi270

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Re: 9mm or 40s&w
« Reply #12 on: April 15, 2009, 05:13:43 PM »
partsman,
I live in OK, but way down south, so probably not going to be much help.

Do a dealer search for Hi Point. I know there are a number listed for Oklahoma.

The nearest to me is in Duncan, I think the guns may be hard to find at the present.

I bought a 40 carbine from them a couple of years ago and on Monday they told me they couldn't get any carbines.

As far as the dealer out in the country, check them out, quite often they will have as good or better prices as someone who has a store.
Logged

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4853
Re: 9mm or 40s&w
« Reply #13 on: April 23, 2009, 02:01:56 PM »
Partsman, I use to do a few gun shows in OK. Basically, Ok. City, and Tulsa. Don't know where your located, or how far your from either of them, but I could look in one of my gun show calander books, and find out when one of the next shows there are. gypsyman
Logged
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman
Pages: [1]   Go Up
« previous next »