Author Topic: Barnes Tipped TSX Bullets  (Read 3036 times)

0 Members and 1 Guest are viewing this topic.

Offline olsingleshot

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 154
Barnes Tipped TSX Bullets
« on: May 18, 2009, 10:46:59 AM »
BARNES TIPPED TSX BULLET

Just the other day I was doing a review of the Tikka rifle in 7mm-08. It was advertised as being able to shoot one inch groups with factory ammunition. I had tried factory ammunition and the best reloads I could find. The best I could do was just the one inch mark. It was getting frustrating because in the past I have found only one rifle I could not improve on accuracy with my reloads.
Then Barnes sent some of their Tipped TSX bullets for me to try out.  I took the best 120 grain bullet load I had and replaced only the bullet with the Barnes bullet. At first I could not believe what I saw in the rifle scope so I turned my spotting scope up to sixty power. There were three bullet holes in a clover leaf pattern. Just to make sure this was not a fluke, I touched off three more and again they were all touching. Next I got out my chronograph and these Barnes bullets, like their non-tipped brothers, chronographed at an average eighty feet per second faster than the bullet I had previously shot with this load.
I have used the TSX bullets since they came out. Last year I took three deer with the Barnes TSX but unfortunately I never recovered a bullet. The exit hole was not larger than normal and the wound channel was significant. The best part was there was no bullet separation resulting in peripheral damage.
I have used these bullets in the following calibers: 7mm-08, 6.5mm-06, .260, 6.5x55, 6mm Rem., .243, .25-06 and .257 Roberts. In each rifle the bullets proved to be of the same accuracy or better than my best loads. The velocity was increased also up to more than 120 feet per second.
So what makes these bullets so great? They have no lead in them. They have a high ballistic coefficient. They retain almost 100% of their weight after impact. They are designed to expand like the petals of a flower. They have wide grooves cut into the shank of the bullet. These grooves give it the extra velocity by reducing drag. This also means less fouling in the barrel.
The TSX and the Tipped TSX are a little more expensive but they are worth every penny. With the higher ballistic coefficient these bullets would be great for long range shots on just about any North American game animals.



Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26939
  • Gender: Male
Re: Barnes Tipped TSX Bullets
« Reply #1 on: May 18, 2009, 01:18:21 PM »
That's good to hear John. My box from Barnes came today. I've not opened it yet but assume all I asked for is in there as it's a fairly large box. You asked me to let you know when I got them. Any good receipes nows the time. Of course I'll likely not load any other than the .224s until we return from GBO Prairie Dog Shoot #5.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline ccoker

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 590
  • Gender: Male
    • www.tacticalgunreview.com
Re: Barnes Tipped TSX Bullets
« Reply #2 on: May 22, 2009, 06:34:32 AM »
I love em..
I use them in my 6.8 SPC AR and they punch clean through every deer and hog I have shot
caliber sized entrance wound, fist sized cavity and quarter sized exit wound