Author Topic: finally got a Freedom Arms  (Read 1644 times)

0 Members and 1 Guest are viewing this topic.

Offline salvo

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 130
finally got a Freedom Arms
« on: April 27, 2009, 05:12:03 AM »
Been wanting a Freedom Arms revolver for at least 15 years or so. Everything just came together this weekend! I found my dream gun listed on another forums classified exactly how I would have ordered one from Freedom Arms.
Model 83 6" .475 Linebaugh, Premier Grade!
It also comes with five front sights, FA cross draw holster, RCBS dies. 500 once fired brass, 500 or so 420-gr. gas checked lead bullets from Montana Bullet Works. Just add powder & primers!
Can't wait to get it here, I have not been this exited about a gun purchase in years.

Love to hear about your experience with the .475
Here are a couple of pictures to hold me over till it gets here.





________
ScottS

 "No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan

Offline Silvertp

  • GBO Supporter
  • Trade Count: (10)
  • A Real Regular
  • *****
  • Posts: 687
Re: finally got a Freedom Arms
« Reply #1 on: April 27, 2009, 07:49:31 AM »

Ive got your gun...same model, holster and caliber.  I think you will really enjoy your new handgun.  Mine is very well made, accurate, easy to carry and a real hoot to shoot.  Its one of the few guns I have that is not for sale and never will be.  I knew it was a keeper after the first cylinder of ammo.

Haven't hunted with it yet but have carried it quite a bit and have taken out a varmit or two.   ;D

Just getting started with the handloading and have been shooting factory ammo up til just recently.

Silvertp

Offline paul105

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 304
Re: finally got a Freedom Arms
« Reply #2 on: April 27, 2009, 10:44:37 AM »
I have the twin to yours (except mine came magnaported) -- I think you're really gonna like it.

Here’s my experience with the .475 (one of my favorite calibers, especially in the FA revolver)

I bought my 6” (ported Std Round Bbl) FA 757 in August of 2007.  I found the gun on Guns America.  After I had committed to buy it I had a overwhelming surge of uncertainty/trepidation.  As it turned out, I haven’t owned a gun that I enjoy(ed) more (equally yes, more no).  I shoot, on average, 4 times a week.  The FA 475 is shot every time I go out.  I have a little over 12,000 rounds thru this gun to date.  Due to the cost of components, I don’t shoot as many rounds per outing as I did when I first bought it but still run 20 to 30 rounds per outing, mostly 400gr at 1,100 fps.  This load level is actually comfortable for me to shoot and allows me to maintain the hard earned skill level developed over the last year and a half. 

Moving up the power ladder, it is significantly more difficult (at least for me) to shoot 420gr bullets at 1,300 fps.  Fatigue sets in quickly with the concentration and physical effort required to control these loads.  You can actually hurt yourself if you are not an experienced shooter, or if you lose concentration.  I’ll shoot 3 to 5 rounds per outing and up the number as we get closer to hunting season.  Recoil isn’t painful (unless you hit yourself in the head), but it is heavy/fast and you have to maintain a good solid grip on the revolver.  You don’t want the gun “rolling” in your hand or any slippage for that matter – too many sharp edges on the FAs.  I could easily get along with 400s at 1,100 fps for anything I might use the 475 on -- but can’t get over the feeling that those 420s at 1,300 might give me a needed edge in the field (southeast end of a northbound elk for example) .

I’ve settled on the two loads mentioned above, the lighter one for plinking, rolling cans, rock busting, varmint shooting and every day use, and the heavy one strictly for hunting.  For all intents and purposes they shoot the same point of impact out to 50 yards.   

My old eyes have trouble picking up Black on Black sights in low light or against a dark background, so I really like FAs fiber optic front sights (especially the green version).

It's hard to explain the high degree of visual satifaction I get shooting cans, plastic containers, milk jugs and rocks with the .475 -- that big bullet really moves stuff around.

Hope you enjoy yours as much as I have mine -- I'll be heading out in a couple of hours to send a few down range.

Paul

Offline salvo

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 130
Re: finally got a Freedom Arms
« Reply #3 on: April 27, 2009, 01:43:31 PM »
Thanks guys, looks like a pretty popular configuration!
The previous owner like a fairly mild load of IMR4227 and the 420 gr bullets.
I plan on taking my time and ease into the heavy loads.
paul105, funny you should mention buyers remorse, I was just thinking today that this is one purchase that has not had me thinking twice. I guess I have wanted one for so long it has not kicked in!
Also I just learned that this gun is also ported, sure could not tell from the pictures, never have cared for porting but I'm not going to loose sleep over it. I just wish it was here, my FFL is closed Sunday/Monday so I will be sending the FFL copy tomorrow.
________
ScottS

 "No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: finally got a Freedom Arms
« Reply #4 on: April 27, 2009, 02:39:20 PM »
My FA .475's are probably my favorite guns. One of them is also a 6" ported PG, but with an octagon barrel. As I've mentioned here before, Ive used mine on a couple of large bears, hogs, elk, bison, and South American water buffalo. The cartridge is absolutely outstanding, and has never disappointed me.

Offline salvo

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 130
Re: finally got a Freedom Arms
« Reply #5 on: April 28, 2009, 10:55:30 AM »
Ken ONeill, I bet it looks great with the octagon barrel! Sounds like you have been blessed to have used that revolver on hunts it was designed for.
________
ScottS

 "No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: finally got a Freedom Arms
« Reply #6 on: April 28, 2009, 02:30:05 PM »
Blessed, indeed.

Offline Sverre A.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 512
Re: finally got a Freedom Arms
« Reply #7 on: May 01, 2009, 02:04:27 PM »
"Been wanting a Freedom Arms revolver for at least 15 years or so"

Why?  :D

Your country - compared to mine  >:( - has a lot of FA`s (secondhanded and NIB)  - and at reasonable prices.

But finally - you got a "huge" gun  ;) (for hunting and papertargets).

Offline fowler

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
Re: finally got a Freedom Arms
« Reply #8 on: May 01, 2009, 04:30:13 PM »
I got a similar gun about a year ago except it was a 4 3/4" octagon barreled gun with a 480 cylinder for it. It is really a great gun but I have to advise to start mild loads and work up slowly. I mean run a 350gr to 375gr bullets at 850fps for a while and get used to it and really enjoy the gun for a while. When that load is really comfortable move up to 1000fps loads then to 1200fps then to full power loads but always keep your round counts low with the heavy loads. These big boomers are flinch creators and fixing this problem once it starts is really hard to do. Much easier to take your time and work up the recoil ladder slowly. Besides it is a lot of fun working up to the heavies.

I have run about 1600 rounds in my gun over the last year and I had to try heavy loads too soon. I settled back down and ran light loads for a while and worked my way up the ladder again, although I still don't really shoot heavy loads very often, and even then they are not red line loads. I normally run a 375gr LFN bullet that I cast at 850fps fps a fun load and a 425gr LFNGC at 1050 to 1100 for hunting here in Colorado for deer and elk.

PM if you would like some of my loads that I have had good success with at mild to mid level speeds, something I found was hard to find in loading manuals and the internet.

Offline salvo

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 130
Re: finally got a Freedom Arms
« Reply #9 on: May 01, 2009, 06:02:12 PM »
Sverre A., your right, I don't know why I waited so long. I guess other guns kept getting in the way.

Thanks for the great tips fowler! I received the packages today, I feel like a kid at Christmas ;D
Here's a pic of all the booty.







I have 500 - 420 gr. WFNGC and 100 - 420 gr. LFNGC so I'm afraid I will be starting out a bit on the heavy side. The PO had a nice load with H4227 at around 950 fps.
Had a few questions though, what is the preferred bullet the WFN or the LFN? Looks like the WFN will give you quite a bit of clearance if one should jump the crimp.
Also what primers seem to work the best? I have a pretty good supply of different primers also a few lbs of 4227, H110 & W296.
I'll shoot you a PM too.
________
ScottS

 "No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18253
Re: finally got a Freedom Arms
« Reply #10 on: May 02, 2009, 01:23:28 AM »
love mine. Ive used the 475 to kill deer pigs and one bufflalo and its allways done the job.
blue lives matter

Offline paul105

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 304
Re: finally got a Freedom Arms
« Reply #11 on: May 02, 2009, 09:34:36 AM »
Salvo,

The 420 LFNGCs may be too long for the FA cylinder -- the WFNGCs should be fine.

Here's a thread that should be helpful and will answer some Freedom Arms specific reloading questions.

http://www.gboreloaded.com/forums/index.php/topic,165538.0.html

Paul