« previous next »
Pages: [1]   Go Down

Author Topic: What is Going On  (Read 656 times)

0 Members and 1 Guest are viewing this topic.

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
What is Going On
« on: May 09, 2009, 04:12:44 AM »
What the heck is going on with my tumbler?
I Tumbled this brass over night and look at it :o
Same thing happened with a small batch of 30-30
I did last weekend.
This media is not very old at all.
The second picture includes 3 pieces
that I did not do and this is how the others started.
HELP :'( :-\

Logged
Mike

Offline ButlerFord45

  • Moderators
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1992
  • Gender: Male
Re: What is Going On
« Reply #1 on: May 09, 2009, 04:35:57 AM »
It almost looks like you put something on the brass to clean the crud out of your media......and it worked!
Logged
Butler Ford
He who does not punish evil, commands it to be done.-Leonardo da Vinci
An armed society is a polite society-Robert A. Heinlein
Only the dead have seen the end of war- Plato
Lord, make my words as sweet as honey
tomorrow I may have to eat them- A lady's sweatshirt

Offline huntswithdogs

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 999
Re: What is Going On
« Reply #2 on: May 09, 2009, 04:36:59 AM »
Have you added anything to your media? From the pictures they looked pitted or something. I'd dump that media, clean the inside of my tumbler and refill with some freah stuff.


Something ain't exactly Kosher in PickleVille!!!!!!!!!!!


HWD
Logged

Offline huntswithdogs

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 999
Re: What is Going On
« Reply #3 on: May 09, 2009, 04:42:52 AM »
Another thing I thought of...Had you used some kind of case lube prior to putting them in the tumbler? Some folks resize and punch primers before tumbling.


HWD
Logged

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #4 on: May 09, 2009, 04:44:42 AM »
I have not added anything to the media
and it worked fine on the first half dozen batches I did.
The only thing out of the ordinary is I add a quartered
dryer sheet to collect the dust and it has worked great for months
so I doubt that could be the culprit.
I just can not figure where all the crud is coming from.  
Logged
Mike

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #5 on: May 09, 2009, 04:52:21 AM »
This started last week with some 30-30 brass, re sized to 7-30Waters
that I got with my new to me Carbine barrel.
It was not freshly sized brass and had been shoot.
I really do not know it's history or that of the 204's
I am tumbling now but am 99% sure it is once fired factory brass.
Logged
Mike

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: What is Going On
« Reply #6 on: May 09, 2009, 05:00:25 AM »
Mike

Does it wipe off ? or is it stuck on the cases ?

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #7 on: May 09, 2009, 05:03:39 AM »
Quote from: stimpylu32 on May 09, 2009, 05:00:25 AM
Mike

Does it wipe off ? or is it stuck on the cases ?

stimpy

It's Stuck.
I had to use brake clean to get it of the 30-30
and it still left a stain :-\
Logged
Mike

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: What is Going On
« Reply #8 on: May 09, 2009, 05:14:23 AM »
Mike

Well buddy , you have only one option . toss the media , wash out the tumbler , wipe off the cases with break cleaner and start from scrach .

Sounds like it was a chemical reaction between something that was on the cases and the dryer sheet , I also see a bunch of black crud on the tumbler nut that may be getting down into the media also .

Richard
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #9 on: May 09, 2009, 05:36:06 AM »
That black crud came from tumbling
It was not there before.

I agree I need to start fresh
but it sure does not make since.
Logged
Mike

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26947
  • Gender: Male
Re: What is Going On
« Reply #10 on: May 09, 2009, 05:52:07 AM »
Any PMC brass in the lot? Dunno what it is with PMC but every time I've put it in the tumbler with others my brass came out that way. I no longer use PMC period. I've seen some stored improperly look like that but not nearly so bad. It will spread like weeds in a garden. I'd dump the media and not reuse it and clean out the tumber good. If you have any PMC brass trash it.

The only thing I've ever seen that will remove that mess is ISSO liquid case cleaner. It will clean them up fast as can be and take all that black off or it did from mine.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #11 on: May 09, 2009, 06:02:04 AM »
No Bill I don't think so.
The 7-30's were Win.
and a quick look the 204's are Hornady.
Logged
Mike

Offline Lead pot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 743
  • Gender: Male
Re: What is Going On
« Reply #12 on: May 09, 2009, 06:10:08 AM »
You got all the use out of that media you want to get.
Looking at the top of the bowl where the thumb screw is you can see all the carbon and the stuff on your brass is dirt stuck on the heavy lube you had on the case.
Clean the brass with soap and water let it dry and run them back through clean media and all will be well.

LP
Logged
Dont go were the path leads,go were there is no path and leave a trail.

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #13 on: May 09, 2009, 06:17:17 AM »
Maybe it came from the 2000 38's I did 2 weeks ago.
They came out OK but may have just been time.
Thanks everyone.
Logged
Mike

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: What is Going On
« Reply #14 on: May 09, 2009, 06:31:45 AM »
Quote from: GameHauler on May 09, 2009, 06:02:04 AM
No Bill I don't think so.
The 7-30's were Win.
and a quick look the 204's are Hornady.

I get that when the media is old and has accumulated excess lube and brass crud. Its kind of a waxy build up.

I will say this....it takes a better man than me to tumble .204 Ruger brass and then spend tedious time cleaning the media out of those little neck cases. I did it once to a batch of 500 pcs. ....never ever again. LOL
Logged

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #15 on: May 09, 2009, 06:43:12 AM »
It's no problem getting the media out of the brass
Just roll it for about 20 seconds in the media separator.
What is a pain in the butt right now is washing 96 pcs
one at a time in hot soapy water but it is coming off.
Logged
Mike

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26947
  • Gender: Male
Re: What is Going On
« Reply #16 on: May 09, 2009, 10:38:38 AM »
If hot soapy water is taking it off it's NOT the same stuff I was talking about.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: What is Going On
« Reply #17 on: May 09, 2009, 04:06:15 PM »
Whoo, I did not know that if you deleted your picture from PB
it could not be viewed on a forum any longer :-\
Anyway thanks to all that replied and all is good ;)
Spent a few hours cleaning everything,
Added new media and have some nice shiny brass
Thanks
Logged
Mike
Pages: [1]   Go Up
« previous next »