« previous next »
Pages: [1]   Go Down

Author Topic: Drill for breech loaders?  (Read 611 times)

0 Members and 1 Guest are viewing this topic.

Offline Victor3

  • GBO Supporter
  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 4241
Drill for breech loaders?
« on: May 17, 2009, 08:59:33 PM »
 Can anyone point me to, or describe procedures for the safe loading/firing of breech loading cannons?

 I'm sure they would differ from gun to gun, but are there basic guidelines similar to those for muzzle loaders?
Logged
"It is a capital mistake to theorize before one has data. Insensibly, one begins to twist facts to suit theories, instead of theories to suit facts."

Sherlock Holmes

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Drill for breech loaders?
« Reply #1 on: May 17, 2009, 11:43:23 PM »
This is not historically accurate but it is a drill I observed being used
with a Krupp breech loader,

1) open breech after firing.

2) use short sponge which pushes any aluminum debris forward out of chamber
extinguishing any embers.

3 load with new round. (he was using blanks at the time) but fixed ammo
shell and powder charge could be used.

4 close breech.

5 prick and prime cartridge, (he used friction primers)

6 fire.



By the way this was a "one man" crew!


Allen <><
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Drill for breech loaders?
« Reply #2 on: May 18, 2009, 12:38:07 AM »
Two directions you could go.

1. to search for older manuals of the time, and
2. to look at modern FM's (Field Manuals) that delimit the drills.  (These should be on-line from the FAS (Field Artillary School) at Ft. Sill.

Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline cannonmn

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3345
Re: Drill for breech loaders?
« Reply #3 on: May 18, 2009, 12:46:18 AM »
That looks like a 75mm Krupp of 1892 that belongs to a friend of mine named Adrian.  Am I correct?
Logged

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Drill for breech loaders?
« Reply #4 on: May 18, 2009, 04:12:36 AM »
Quote from: cannonmn on May 18, 2009, 12:46:18 AM
That looks like a 75mm Krupp of 1892 that belongs to a friend of mine named Adrian.  Am I correct?

;D  we seem to have some of the same friends of course collecting artillery is a small world compaired to say coins or stamps......

He is overseas for the past few months should be getting back soon.
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Online Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12610
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Drill for breech loaders?
« Reply #5 on: May 18, 2009, 04:17:38 AM »
Doesn't Switlik's have Drill for Breechloaders?
Logged

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Re: Drill for breech loaders?
« Reply #6 on: May 18, 2009, 01:23:16 PM »
I guess there's no need to thumb the vent. ;D ;D
Logged

Offline Victor3

  • GBO Supporter
  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 4241
Re: Drill for breech loaders?
« Reply #7 on: May 19, 2009, 12:51:21 AM »
 Did they swab?

 A good idea regardless of historical methods, but I imagine swabbing might have gunked up the works in some designs.
Logged
"It is a capital mistake to theorize before one has data. Insensibly, one begins to twist facts to suit theories, instead of theories to suit facts."

Sherlock Holmes

Offline cannonmn

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3345
Re: Drill for breech loaders?
« Reply #8 on: May 19, 2009, 02:59:53 AM »
You may want to look thru this book, a very quick flip thru didn't turn up firing drill but as extensive as it is, you'd think it might be in there somewhere.

http://books.google.com/books?id=-mxXSyO3aDUC&dq=dyer+light+artillery&printsec=frontcover&source=bl&ots=BOiJx07twD&sig=NXN7Yjj8EY63kNQmofQ7PLzdgIg&hl=en&ei=9akSSrvjJITS8wT_t8WPBA&sa=X&oi=book_result&ct=result&resnum=1#PPR1,M1
Logged
Pages: [1]   Go Up
« previous next »