Author Topic: Where to get small parts for a 1949 Winchester 1894 30-30  (Read 671 times)

0 Members and 1 Guest are viewing this topic.

Offline Bossloper

  • Trade Count: (66)
  • Contributor
  • ***
  • Posts: 375
  • Gender: Male
  • Veteran USAF
Where to get small parts for a 1949 Winchester 1894 30-30
« on: June 14, 2009, 01:23:50 AM »
Hi All,

Below is a left side picture of a Pre-64 1894 I picked up recently. Serial number makes it a 1949. Like many of them, it was drilled and tapped for a side mount scope assembly, which it came with and a nice 6x Busnell. I put a Williams 5D on it for deer hunting and would like to fill the wholes, but wanted to see if anyone could suggest one place that might carry everything I need. It shoots great and was priced right so I figure I can spend a few dollars on screws. 



Thanks, Brett
Life Member NAHC, TU
NRA & Outdoor Educator
Hunter Ed. Instructor

Offline Hank08

  • Trade Count: (35)
  • A Real Regular
  • ****
  • Posts: 887
Re: Where to get small parts for a 1949 Winchester 1894 30-30
« Reply #1 on: June 14, 2009, 09:16:55 AM »
Those screws are 8s, if a gunsmith did it they would be 8x40. If done otherwise they might be 8x32.  You should find the filler screws in most gun stores. Your also missing the screw that holds the pin in that locks the lever to the bolt.  if that falls out you'll be out of action.
H08

Offline bustedknee

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 136
Re: Where to get small parts for a 1949 Winchester 1894 30-30
« Reply #2 on: June 14, 2009, 09:29:18 AM »
http://www.midwayusa.com/viewproduct/?productnumber=446782

The guys at the Hardware store let me take a rifle in to find the correct size allen screws to fill the holes left over from the side mount.

Offline kitchawan kid

  • Trade Count: (4)
  • A Real Regular
  • ****
  • Posts: 604
  • Gender: Male
Re: Where to get small parts for a 1949 Winchester 1894 30-30
« Reply #3 on: June 14, 2009, 11:21:58 AM »
You have a great hardware store there,in N.Y. they would call in a swat team.
N.R.A. life member
N.Y.S.R&P
PUTNAM FISH &GAME ASS.
RAMAPOO RIFLE AND REVOLVER

cowboy action,hunting,target-1911's rule

Offline Bossloper

  • Trade Count: (66)
  • Contributor
  • ***
  • Posts: 375
  • Gender: Male
  • Veteran USAF
Re: Where to get small parts for a 1949 Winchester 1894 30-30
« Reply #4 on: June 15, 2009, 04:39:48 AM »
Thanks
Life Member NAHC, TU
NRA & Outdoor Educator
Hunter Ed. Instructor