« previous next »
Pages: [1]   Go Down

Author Topic: Kit pistol?  (Read 1406 times)

0 Members and 1 Guest are viewing this topic.

Offline wormbobskey

  • Trade Count: (27)
  • A Real Regular
  • ****
  • Posts: 779
  • Gender: Male
Kit pistol?
« on: July 12, 2009, 06:57:37 AM »
Can anyone give me a value on a CVA .45 percussion kit pistol? The person said it was unfired without the ramrod.
Logged
OSTA
Lanums Animal Damage Control & Repair
We don't do bugs

Offline necchi

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1842
  • Gender: Male
Re: Kit pistol?
« Reply #1 on: July 12, 2009, 08:57:12 AM »
What is it? Philly Derringer,, Kentucky,,Hawkin/Mountain,,Trapper ,,??

06 catalog prices are 110 for the Philly
                             133 for the Kentucky
                             135 for the Hawkin/Mountain
                             169 for the Trapper
Add about 20$ for current I'm guessing.
 I picked up a H&A Kentucky un-finished kit at a local gun show for $50,,,

No ramrod? well, subtract 20 from the askin price. the brass ends are worth that much + shipping.
Logged
found elsewhere

Offline wormbobskey

  • Trade Count: (27)
  • A Real Regular
  • ****
  • Posts: 779
  • Gender: Male
Re: Kit pistol?
« Reply #2 on: July 12, 2009, 01:32:18 PM »
In the discription they said colonial pistol so I'm not sure what type it is. Has about a 5 or 6 inch barrel. Wood is walnut and about an inch or so shorter than the barrel. This one looks to have some time on it, maybe 15 or 20 years. They say it needs refinished because the oridginal finish was done poorly.
Logged
OSTA
Lanums Animal Damage Control & Repair
We don't do bugs

Offline necchi

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1842
  • Gender: Male
Re: Kit pistol?
« Reply #3 on: July 12, 2009, 03:58:54 PM »
 That would very likley be the Philadelphia Derranger. The other 3 types have a 9" barrel and that's hard to confuse with 5-6". However, someone measuring the tang with the barrel could possibly confuse it as barrel length and come up with 5".
 Re-doing or refinishing someone elses "poorly done" kit job can be a PITA. Most common errors are no finish work with the factory inletting and over sanding the exterior wood, looseing the lines, and not doing the finish work too or polishing the brass. Worse yet, is that it actually WAS fired and not cleaned!
 15-20 yrs don't really mean much as the parts are still commonly available,(see link),it only means the very likley poly urethane finish has turned brittle and the internal lock parts have been neglegted. Many times folks have a sentimental attachment to an item like this because it was done by someone they knew. Because of that, they have a higher value vested too it than the actual material value of a boogered job.


http://www.dixiegunworks.com/product_info.php?cPath=22_162_194&products_id=872

here's another link to other kit's by similar to CVA and others

http://www.dixiegunworks.com/default.php?cPath=22_162_194&osCsid=7a34200fe82d12106d4f85a145038501
Logged
found elsewhere

Offline Buckskins & Black Powder

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1700
  • Gender: Male
    • Buckskins & Black Powder
Re: Kit pistol?
« Reply #4 on: July 12, 2009, 06:01:52 PM »
Colonial pistol is a very fun pistol! Its not a derringer. I see them go for $100- $150 on ebay.
Logged

Offline longcaribiner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 376
Re: Kit pistol?
« Reply #5 on: July 13, 2009, 09:59:56 AM »
Colonial pistol had about a 7 inch barrel. and a metal ramrod.  45 caliber rifled barrel.  As I recall there were two different percussion models.  One used CVA's early really cheapo lock and had a welded bolster on the gun for the breech system.  The other used their slightly better lock and had a drum and nipple system.  The latter is more preferrable.   
Logged

Offline wormbobskey

  • Trade Count: (27)
  • A Real Regular
  • ****
  • Posts: 779
  • Gender: Male
Re: Kit pistol?
« Reply #6 on: July 13, 2009, 11:14:27 AM »
I thought ebay took the cowardly way out and didn't sell any type of guns. I tried to list a choke tube once and they said it was against their policy. This gun looks a little bigger than the derringer that dixie has listed.
Logged
OSTA
Lanums Animal Damage Control & Repair
We don't do bugs

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: Kit pistol?
« Reply #7 on: August 24, 2009, 08:01:32 AM »
Sold this 45 CVA Philly Derringer for $85 last year.   Buyer was happy as apple pie with the price and condition and I was happy to get rid of it without loosing any money on it.

Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline wormbobskey

  • Trade Count: (27)
  • A Real Regular
  • ****
  • Posts: 779
  • Gender: Male
Re: Kit pistol?
« Reply #8 on: August 24, 2009, 08:58:24 AM »
Add about 4" to the barrel and a couple to the wood and it would be a match. They wanted 75.00 plus shipping and wouldn't come down any.
Logged
OSTA
Lanums Animal Damage Control & Repair
We don't do bugs

Offline longcaribiner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 376
Re: Kit pistol?
« Reply #9 on: August 25, 2009, 06:58:13 AM »
Fo some reason there was a flock of colonial pistols on the auction sites in the past two weeks.  One was inpieces and only brought $23.00.

Th one wih t drum and nipple is more desireable than the welded bolster.  A FRIEND scrounged up a kentucy barrel ndput it on his Colonia pistol and with new sigts, it made a fair pistol.
Logged
Pages: [1]   Go Up
« previous next »