Author Topic: Want a CAvalry Model???  (Read 606 times)

0 Members and 1 Guest are viewing this topic.

Offline sherppa

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 180
Want a CAvalry Model???
« on: September 05, 2009, 11:22:47 AM »
Looking for an 1873 Army, Cavalry Model, what are your suggestions, Uberti, Cimmaron, Berreta ( and put on wood grips).  I am looking for something that looks the part.  Any suggestions or input would be appreciated.

sherppa 

Offline xd45nut

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 128
  • Gender: Male
Re: Want a CAvalry Model???
« Reply #1 on: September 06, 2009, 02:31:05 AM »
How much do you want to spend?
It is hard to fail, but it is worse never to have tried to succeed.


Far better is it to dare mighty things, to win glorious triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat.


In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

Theodore Roosevelt

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
Re: Want a CAvalry Model???
« Reply #2 on: September 06, 2009, 04:49:10 AM »
Uberti, has a model like that right down to the stamp on the wood grips.  I checked Cimmaron and EMF and while they used to offer those, I don't see them now on their web site.  You may well run across them used, and you could also check Gunbroker.  I see there is a pair of real Colt 2nd gen guns there with consecutive serial numbers, unturned (of course if they were mine, I would shoot them!) if you want to spend the $$$$.  You should at least see them.  Put in 'cavalry 45' and they will come up.  Hope you can find something that will work for you.  44 Man
You are never too old to have a happy childhood!

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: Want a CAvalry Model???
« Reply #3 on: September 06, 2009, 05:29:35 AM »
Uberti without a doubt...  :-\   Well, maybe ONE doubt...  :-[  If I were to ever get another SAA it would be one from USFA!   ;D

Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline sherppa

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 180
Re: Want a CAvalry Model???
« Reply #4 on: September 06, 2009, 10:31:26 AM »
thanks guys!  Thinking uberti because of cost.  The USFA would be tops if price was not an issue.  What about putting a set of wood grips on on a 7 1/2 inch stampede?  I can get one for 400.00 nib?  It would not have the cool cavalry markings but at a distance I think it would look acceptable.

thouhgts?

Also if a rich uncle were to die, is there a colt being made that would be of the 1873 bp model?

sherppa   

Offline xd45nut

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 128
  • Gender: Male
It is hard to fail, but it is worse never to have tried to succeed.


Far better is it to dare mighty things, to win glorious triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat.


In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

Theodore Roosevelt

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
Re: Want a CAvalry Model???
« Reply #6 on: September 11, 2009, 01:51:09 AM »
Don't sell that Heritage short.  It's a very well made gun for the price.  44 Man
You are never too old to have a happy childhood!

Offline xd45nut

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 128
  • Gender: Male
Re: Want a CAvalry Model???
« Reply #7 on: September 11, 2009, 03:31:15 PM »
Yeah, the big bore Rough Riders are made by The Piettas of Italy, by no means low end manufacture.
It is hard to fail, but it is worse never to have tried to succeed.


Far better is it to dare mighty things, to win glorious triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat.


In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

Theodore Roosevelt

Offline Blackhawk44

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 981
Re: Want a CAvalry Model???
« Reply #8 on: September 11, 2009, 04:21:07 PM »
I'd brown bag until I could get a USFA.  Use it forever and it will still become an heirloom.