Author Topic: Encore .45/410 15 inch barrel  (Read 493 times)

0 Members and 1 Guest are viewing this topic.

Offline stanw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Encore .45/410 15 inch barrel
« on: October 18, 2009, 07:35:34 AM »
thinking of trading a .22-250 barrel for a 45/410 Encore.  question is probly stupid but can a 454 casul be shot in this barrel also?? thanks could not find any thing in search.

Offline stubshaft

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 489
  • ROA's Rule
Re: Encore .45/410 15 inch barrel
« Reply #1 on: October 18, 2009, 02:55:37 PM »
The cartridge will fit and it will fire.  I don't know if the barrel will handle the pressure. 
If I agreed with you then we would both be wrong.

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: Encore .45/410 15 inch barrel
« Reply #2 on: October 18, 2009, 03:09:14 PM »
It may be OK in an Encore, it is not ok in a Contender.  But why?  It is still a good jump to the rifling, so will not tend to be all that accurate.  You are better off getting a barrel made for the round.
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline stubshaft

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 489
  • ROA's Rule
Re: Encore .45/410 15 inch barrel
« Reply #3 on: October 18, 2009, 04:24:12 PM »
Since both of them headspace on the rim you could probably even fire a 460 smith as it is shorter than a .410 anyway.  The deciding factor is where the rifling starts.
If I agreed with you then we would both be wrong.

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
Re: Encore .45/410 15 inch barrel
« Reply #4 on: October 18, 2009, 04:46:25 PM »
I asked JD Jones Owner of SSk this same question and he said that no one should do it. the chambers are too sloppy for that kind of pressure.

 you will get a lot of split cases and blow back.

Offline stanw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: Encore .45/410 15 inch barrel
« Reply #5 on: October 19, 2009, 01:54:23 PM »
thanks all...... RickyP that was all I needed I will not try it.