« previous next »
Pages: [1]   Go Down

Author Topic: Peep sights Win.94 Trapper  (Read 744 times)

0 Members and 2 Guests are viewing this topic.

Offline Huntz

  • Trade Count: (21)
  • Avid Poster
  • **
  • Posts: 213
  • Gender: Male
Peep sights Win.94 Trapper
« on: November 15, 2009, 06:13:28 AM »
  I have a pre saftey trapper 30-30 I would like to put a peep sight and new front white faced blade on.Will the sight   fit in existing holes????I do not want to drill and tap.Anybody know a reasonbly priced place that carrys these items???Your help is much appreciated.Thanks,Huntz ;D
Logged
Politically Incorrect

Offline Dee

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 23870
  • Gender: Male
Re: Peep sights Win.94 Trapper
« Reply #1 on: November 15, 2009, 06:50:17 AM »
Lyman 66 Aperture sight will mount on the two pre-drilled and plugged holes on the left side of the receiver. I have been using this sight on one rifle for almost 40 years, and on a Model 92 for about 5.
Front post on both rifles is an XS with a thin off white or ivory colored stripe running up the middle of it for low light conditions, and helps draw a finer bead on the target.
Logged
You may all go to hell, I will go to Texas. Davy Crockett

Offline Huntz

  • Trade Count: (21)
  • Avid Poster
  • **
  • Posts: 213
  • Gender: Male
Re: Peep sights Win.94 Trapper
« Reply #2 on: November 15, 2009, 03:15:21 PM »
Thanks for the info Dee.Much appreciated. Huntz
Logged
Politically Incorrect

Offline ScoutMan

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
Re: Peep sights Win.94 Trapper
« Reply #3 on: November 16, 2009, 10:21:56 AM »
Dee,
My Trapper is just drilled on top for a scope, so you would probably have to go with the Williams "WGRS" sight. However, I do think that they make their "5D" and "Foolproof" peeps utilizing the screw holes for mounting a scope.
Logged
If you can get closer, get closer
If you can get steadier, get steadier.

A telescope helps you see; it does not help you hold and squeeze.-Jeff Cooper

Offline Tallwalker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 233
Re: Peep sights Win.94 Trapper
« Reply #4 on: November 16, 2009, 02:12:09 PM »
As I just replied in another thread, Millett also makes a ramped front sight for the lever guns with a dovetail cut in the barrel. I think they make it in both white, and orange. I have the orange ones, and find them to work very well indeed. One is on my 94 trails end .44, and has worked well in all hunting, and shooting situations. If I remember right they aren't very expensive either. Brownells has them, as do other places, or direct from Millett.
Logged

Offline mogwai

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 129
Re: Peep sights Win.94 Trapper
« Reply #5 on: November 17, 2009, 09:24:54 AM »
Quote from: Tallwalker on November 16, 2009, 02:12:09 PM
As I just replied in another thread, Millett also makes a ramped front sight for the lever guns with a dovetail cut in the barrel. I think they make it in both white, and orange. I have the orange ones, and find them to work very well indeed. One is on my 94 trails end .44, and has worked well in all hunting, and shooting situations. If I remember right they aren't very expensive either. Brownells has them, as do other places, or direct from Millett.

Is that front sight wide or thin?
Logged
Pages: [1]   Go Up
« previous next »