« previous next »
Pages: [1]   Go Down

Author Topic: Contender Sight Information  (Read 1032 times)

0 Members and 1 Guest are viewing this topic.

Offline Iowa Fox

  • Trade Count: (7)
  • Contributor
  • ***
  • Posts: 250
Contender Sight Information
« on: May 11, 2003, 05:52:18 AM »
Sometime back someone posted a very comprehensive chart with factory Contender sight information as used by TC. Barrel length, caliber. front blade heigth and width, rear notch width, rear blade size. I saved it but did not print to paper. You quessed it, I lost it. Would someone still have it and be so kind as to repost it.

Thanks,
JD
Logged

Offline Bug

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 322
Hmmmmmmmmm,
« Reply #1 on: May 12, 2003, 01:49:00 AM »
The website I had bookmarked was at Prarienet.org, and it is "no longer found". Maybe someone else has another site,,,,I HOPE! ,,,,,,,,Bug.
Logged
It's The Little Things That Matter.

Offline wheelgun

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
sights
« Reply #2 on: May 12, 2003, 04:43:23 PM »
i don't know what barrel you want info. for so this is what i have.You can also go to Foxridge custom shop and look at pistol sights.

10" barrels;
barrel      rear sight         front sight heigth         blade height

22lr bull    low                   .530"                          .180"
22 wmr     low                   .530"                          .180"
22 hornet  low                   .530"                          .180"
222 rem    med                  .595"                          
223rem     med                  .595"
32hr mag   med                  .595"                         .257"
32/20        low                    .595"                         .262"
357mag      med                 .595"                          .265"
357 max     med                 .595"                          
44mag        med                 .635"                          
45acp         med                  .595"                           .245"

14" barrel
7-30 waters   high                .530"                           .180"


this is all i can find right now hope it helps.
Logged

Offline wheelgun

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
sights
« Reply #3 on: May 12, 2003, 04:52:16 PM »
I know the above list is kinda confusing.It did'nt post like i printed it.E-mail me if needed i will send you a better copy.
Logged

Offline Iowa Fox

  • Trade Count: (7)
  • Contributor
  • ***
  • Posts: 250
Contender Sight Information
« Reply #4 on: May 12, 2003, 05:35:12 PM »
The barrel I am trying to find sight dimensions for is a 14" stainless 22 LR Match. Picked up a used one and with rear sight down as far as it will go it still shoots 5" high at 25yds. I see in the classifieds Contendernut has sights for a S-14 22LR match. I'm going to ask if he will measure for us.

Thanks
JD
Logged

Offline contendernut

  • Trade Count: (19)
  • Contributor
  • ***
  • Posts: 298
    • http://www.contendernut.com
Contender Sight Information
« Reply #5 on: May 12, 2003, 05:53:47 PM »
JD,

The barrel and sights are in my shop.  I'll measure it in the morning and get back to you with the measurements.
Logged
-----------
Gary

Offline contendernut

  • Trade Count: (19)
  • Contributor
  • ***
  • Posts: 298
    • http://www.contendernut.com
Contender Sight Information
« Reply #6 on: May 13, 2003, 10:29:45 AM »
14" 22 LR Match sight heights:

Front blade 0.185"
Rear blade 0.55"


Overall height from barrel to top of front sight: 0.485"
Overall height from barrel to top of rear blade with it centered: 0.491"
Logged
-----------
Gary

Offline Iowa Fox

  • Trade Count: (7)
  • Contributor
  • ***
  • Posts: 250
Contender Sight Information
« Reply #7 on: May 13, 2003, 03:42:41 PM »
Thanks Contendernut, Thats really helps me out.
Thankyou Wheelgun.
I'm printing to paper this time so I don't loose it.

JD
Logged

Offline contendernut

  • Trade Count: (19)
  • Contributor
  • ***
  • Posts: 298
    • http://www.contendernut.com
Contender Sight Information
« Reply #8 on: May 13, 2003, 04:22:50 PM »
JD,

The way I see it, acording to my barrel's sights, the front needs to be the same distance from the top of the barrel as the top of the rear sight.  You may be able to center your rear sight and measure this distance.  Then subtract that amount from the front base to see how high the blade needs to be above the front sight base.
Logged
-----------
Gary

Offline Iowa Fox

  • Trade Count: (7)
  • Contributor
  • ***
  • Posts: 250
Contender Sight Information
« Reply #9 on: May 13, 2003, 05:14:22 PM »
Gary,
That's what I was thinking also after looking at your numbers. The front sight is the correct one, but someone has gotten the wrong rear sight on this barrel somewhere in its life.

Thanks,

JD
Logged

Offline AJMD429

  • Trade Count: (0)
  • Posts: 3
Re: Contender Sight Information
« Reply #10 on: December 02, 2009, 04:01:15 PM »
Not to dredge up a really old topic or anything  ;), but searching throughout the forum I couldn't find ANY specific source for replacement front blades for Contenders...

...If I have to just find a piece of steel the same width and fabricate one from scratch, I suppose I can, but surely someone sells them?

My ultimate goal is a fiberoptic front sight, but even a plain steel one would work; I can always drill through it, cut a notch or two in the top to let light down to the fiber, and go with that (I've done it on a couple other 'blade' type front sights). 

So - any SOURCES for the front sight? 
Logged
Pages: [1]   Go Up
« previous next »