Author Topic: dumb question  (Read 558 times)

0 Members and 1 Guest are viewing this topic.

Offline GREYGHOSTt

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 101
dumb question
« on: September 06, 2003, 04:13:05 AM »
What current manufactured single action is the best for fanning? :?
third eye blinds the other two.

Offline Cheyenne Ranger

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1111
dumb question
« Reply #1 on: September 06, 2003, 04:37:10 AM »
This is just what I've heard so don't take it as Gospel:

The Ubertis and other clones, while made of modern materials are copies of a very, very long design with some inhernet weaknesses.

The Rugers, while built like a tank, have that wonderful transfer bar and I've read about them breaking just shooting CAS events.

"Bout all I've heard.  Thinking over on the SASS wire is none of them are really designed for fanning.  If that's the case I would pick the cheapest as it probably will break somewhere down the road :grin:

Cheyenne
SASS 48747L
RO II
Thunder River Renegades
SBSS #1170--OGB

Offline GREYGHOSTt

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 101
dumb question
« Reply #2 on: September 06, 2003, 08:12:21 AM »
thx this is sad news :(
third eye blinds the other two.

Offline Flint

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1053
fanning
« Reply #3 on: September 06, 2003, 08:46:11 AM »
No, FANNING is sad news.....
Flint, SASS 976, NRA Life

Offline howdy doody

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 453
dumb question
« Reply #4 on: September 06, 2003, 09:06:56 AM »
I'll bet you could fan with one of the quick draw hammers like Munden and Bob James use. The hammers really stick up there.
Fanning is not allowed in cowboy action shooting, although slip hammering is.
I could see fanning as fun with a sixshooter while out plinking though. Never have tried to personally, but it might be fun.  :grin:
yer pard,
Howdy Doody
 
Darksider from Doodyville USA

Offline Old Cane

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 470
    • http://ee.1asphost.com/OldCane/
dumb question
« Reply #5 on: October 16, 2003, 06:10:31 AM »
The Rodeo is built like a tank. If any can handle it they can. Of course a Vaquero....oh, I forget who I'm talking to.

But yeah, if you want to really get busy fanning I'd check with Munden.

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
dumb question
« Reply #6 on: October 16, 2003, 07:51:50 AM »
Check with Bob Munden.  He will build you a gun that can take fanning.  It requires a hammer stop so you don't pound the hand, cylinder bolt, and cylinder notches to pieces.   44 Man
You are never too old to have a happy childhood!

Offline Roy Cobb

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 150
dumb question
« Reply #7 on: October 16, 2003, 01:06:46 PM »
Any SAA or clone can be fanned, Ruger vacqueros have to be modified
but regardless of which one you use unless you rework it from the inside out it is going to break no ifs ands or buts you may as well get a quality colt or ruger and have Munden or Wes Flowers or Bob james rework the action for you but you will have nearly a grand or more in just the action work for Fast draw type fanning, though I fan my Ubertis frequently constant abuse of this type even on the highest quality base firearm will eventually break it.

Offline Lone Yankee

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 110
dumb question
« Reply #8 on: October 26, 2003, 01:57:15 AM »
To me,  a SA firearm is a fine instrument,  not to be abused by fanning.

Lone
Secretary

Southwest Gun Club
Home of Mississippi Regulators