Author Topic: Proper scope for semi-Scout mount  (Read 414 times)

0 Members and 1 Guest are viewing this topic.

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Proper scope for semi-Scout mount
« on: December 30, 2009, 11:29:58 AM »
In the past pictures have been posted of folks who have mounted a scope far enough forward to clear the hammer.  Sort of a semi-Scout mounting.  I was wondering, what scopes work best for this concerning eye relief.  Seems like a pistol scope, and even a dedicated scout scope might have too much eye relief.  Meaning that a scope mounted this way may still be too close to the eye.  Would shotgun scopes work?

Thanks for the help and Happy New Year. 

Offline dieselten

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 117
  • Gender: Male
Re: Proper scope for semi-Scout mount
« Reply #1 on: December 30, 2009, 12:08:27 PM »
you are correct in that a pistol scope would have too much eye relief.  You need a dedicated shotgun or big game scope.  These typically have 4" of eye releif which allows the scope to be mounted right in front of the hammer.

Offline jwardiii

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 7
  • Gender: Male
Re: Proper scope for semi-Scout mount
« Reply #2 on: December 30, 2009, 12:11:34 PM »
I've got a Burris Timberline Ballistic Plex mounted this way on a .308 Survivor. This scope had a listed eye relief of 3.7 - 5 inches. Seems to work OK through the power range.

T
There ain't many problems a man can't fix with 700 dollars and a .30-06.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Proper scope for semi-Scout mount
« Reply #3 on: December 30, 2009, 12:15:39 PM »
How its mounted as well as were its mounded will also matter , some handgun scopes have a shorter eye releif to were it will only need about 8" and some of the Bushnell standard rifle scopes have up to 6" of ER .

The size of the scope's bell also comes in to play , or you could go with a Red Dot and it may not matter too much .

Clear as MUD right ?

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Oldshooter

  • GBO subscriber and supporter
  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 6426
Re: Proper scope for semi-Scout mount
« Reply #4 on: December 30, 2009, 12:16:05 PM »
Leupold makes a scout mount scope in a 2x that i have mounted on my 336 lever in 35 rem, I love it and my son just came back from Uvalde with two whitetail he killed with it at 100 and 150 yards!
“Owning a handgun doesn’t make you armed any more than owning a guitar makes you a musician.”

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

Offline Tallwalker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 233
Re: Proper scope for semi-Scout mount
« Reply #5 on: December 30, 2009, 12:32:38 PM »
The Leupold 2 1/2x regular scope has about 5" of eye relief. I have a friend that loves the one he has on his 45-70 Handi because of that....... and it's a good scope.

Offline canon6

  • GBO Supporter
  • Trade Count: (119)
  • Senior Member
  • *****
  • Posts: 1508
  • Gender: Male
Re: Proper scope for semi-Scout mount
« Reply #6 on: December 30, 2009, 12:41:22 PM »
I use the Simmons 2.5x20 shotgun scope.Here is a picture is the set up ,on my 25-35. hth     Doug
a armed man is his own master

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Proper scope for semi-Scout mount
« Reply #7 on: December 30, 2009, 01:57:25 PM »
I have had a couple of the Simmons 2.5X Shotgun scopes on handis in the past and the mount just like Canons pic.

It works just like a scope setup, allowing shooting with both eyes open. But if you get more power it doesn't work as the difference between what your eyes see will cause them to just see thru the more powerful one. If that makes sense...

CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Re: Proper scope for semi-Scout mount
« Reply #8 on: December 30, 2009, 04:01:21 PM »
Guys, thanks for the replys. I am mullin again.  Mullin over getting another 4570, shortening the barrel, and mounting a scope as we are discussing.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Proper scope for semi-Scout mount
« Reply #9 on: December 30, 2009, 04:10:15 PM »
Here is a pic I just ran across from my 12Ga USH when I thought a aimpoint would be a good plan...



It worked well, but the batteries died too quickly.

Nothing fancy here, I found a weaver base that matched the hole spacing of the rear site. Cut screws to fit and mounted it up...

CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.