« previous next »
Pages: [1]   Go Down

Author Topic: Need help with a Huntsman forend.  (Read 3922 times)

0 Members and 1 Guest are viewing this topic.

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Need help with a Huntsman forend.
« on: October 17, 2009, 10:05:26 AM »
Hello everyone, Could someone please tell me where I can buy a black synthetic forend for a Huntsman.
Thank you very much!

GOOD SHOOTING!
Slufoot
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #1 on: October 17, 2009, 11:11:20 AM »
Ya might try the Sidekick forend.

Tim

EDIT:  H&R has synthetic forends specifically for the Huntsman, part# FM03107.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: Need help with a Huntsman forend.
« Reply #2 on: October 17, 2009, 12:05:12 PM »
Thanks Tim,
The Sidekick forend will not work. This is actually for a friend of mine and he ordered a Sidekick forend from H&R, he said it was the only synthetic muzzleloader forend they had. After receiving it he discovered that the hole spacing for the barrel attachment screw was different.
I told him that I would try my best to find one for him, that's why I'm here, this is by far the best place to get help with H&R problems.

I'll contact Choate and see if they can help.

Thanks again, Tim!

GOOD SHOOTING!
Slufoot
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #3 on: October 17, 2009, 01:24:32 PM »
I thought maybe that would be the case, could it be altered to work, or is it too short? It's not hard to drill and counter bore it to fit, you'd just have an extra hole in it that shouldn't affect function.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: Need help with a Huntsman forend.
« Reply #4 on: October 28, 2009, 04:30:16 PM »
Hey Tim, just an update.
My friend called Choate and asked if they had a forend for a Huntsman. They told him they had two different forends and they would need a picture of what he needed with a tape measure in the picture for refernce. ???

I took some pictures of mine and he snail mailed them to Choate.

He received the forend today. It is the correct forend but they put a wood screw sling swivel stud in the forend instead of the 10-32 machine screw stud. They also forgot the spring steel ramrod retainer and the nut that holds it in place.

He gave it to me and I made the retainer out of some spring steel and installed the correct swivel stud and Loc-Tited the nut in place.

Thanks for the tip on who to call, it was a bit of a bumpy ride but we got there!

GOOD SHOOTING!
Slufoot
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #5 on: October 28, 2009, 05:50:38 PM »
That's great!!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline keg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
Re: Need help with a Huntsman forend.
« Reply #6 on: November 23, 2009, 12:57:11 PM »
not asking how much you paid but what do they ask for that forend
Logged

Offline ILHunter

  • Trade Count: (3)
  • Member
  • *
  • Posts: 84
Re: Need help with a Huntsman forend.
« Reply #7 on: November 25, 2009, 04:28:01 AM »
Did they forget the retaining spring ?  Or does it not come with it ?
Do you know the part# for the huntsman forend?
ILHunter
Logged

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: Need help with a Huntsman forend.
« Reply #8 on: November 27, 2009, 03:23:26 PM »
Quote from: keg on November 23, 2009, 12:57:11 PM
not asking how much you paid but what do they ask for that forend

Quote from: ILHunter on November 25, 2009, 04:28:01 AM
Did they forget the retaining spring ?  Or does it not come with it ?
Do you know the part# for the huntsman forend?
ILHunter
This forend was actually for a friend of mine, he called Choate and ordered it and paid them. I didn't ask how much it was.
I thought about the forend not having the ramrod retaining spring and told my friend that H&R probably just ordered the stocks and installed the hardware themselves.
If you call Choate about a forend be sure to ask about the correct swivel stud, retaining spring and nut.
Logged

Offline ILHunter

  • Trade Count: (3)
  • Member
  • *
  • Posts: 84
Re: Need help with a Huntsman forend.
« Reply #9 on: December 01, 2009, 04:28:02 AM »
Thanks Slufoot.  I'll check with Choate.
Logged

Offline keg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
Re: Need help with a Huntsman forend.
« Reply #10 on: December 02, 2009, 04:05:34 PM »
I Asked them in an e-mail my first was a question about black synthetic forends here was their reply.

We do have the forends but we only sold them to H&R and they completed them. You have to use the hardware off you wood forend.
Thanks

I asked about price including shipping, part number, and est delivery time.

The part OEM MO3107 Muzzleloader Forend at $21.00. They are in stock.UPS ground take 3-7 days for $8.50, we can also send next day and second day but it cost more.
Thanks
Fred

Hope this helps about whether they send hardware and other info.
Logged

Offline snakeskinner

  • Trade Count: (4)
  • Member
  • *
  • Posts: 63
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #11 on: December 07, 2009, 01:08:20 PM »
That info should be added to the FAQ's.
Logged
Get right with the Man.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #12 on: December 07, 2009, 02:05:30 PM »
It is................now.   ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bubba

  • Trade Count: (62)
  • Senior Member
  • *****
  • Posts: 1898
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #13 on: December 07, 2009, 02:19:26 PM »
Thanks Tim
Logged
”A gun is like a parachute. If you need one, and don’t have one, you’ll probably never need one again.”

Molon Labe

Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline JaredDrake

  • Trade Count: (1)
  • Member
  • *
  • Posts: 18
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #14 on: January 01, 2010, 07:48:05 AM »
I ordered a synthetic forearm from NEF and even said it was for a Huntsman. They said they had one and I paid for it. When I got it, it was too long. Guess it was for the Sidekick. I didn't keep track of the receipt so now I'm stuck with it. I'll try using the information above and ordering a new one. Glad I found this thread.
Jared
Logged
In my many years I have come to a conclusion that one useless man is a shame, two is a law firm and three or more is a congress. - John Adams

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need help with a Huntsman forend.
« Reply #15 on: January 01, 2010, 07:51:14 AM »
You're not the first to be burned by CS not knowing their products, you're not necessarily stuck with it, sell it in the H&R Classifieds.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline whitetailmaniac

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 175
  • Gender: Male
  • Chris, Texas
Re: Need help with a Huntsman forend.
« Reply #16 on: January 01, 2010, 10:20:44 AM »
PM sent to Jared

     Chris
Logged
Pages: [1]   Go Up
« previous next »