« previous next »
Pages: [1]   Go Down

Author Topic: survivor stock on old topper  (Read 632 times)

0 Members and 2 Guests are viewing this topic.

Offline Highbrass

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
survivor stock on old topper
« on: January 30, 2010, 05:45:33 AM »
Hi everyone.Long time no post.I have aquired an old Topper 158 with an AJ prefix.Will the choate survivor stockset work on this model?I looked in the FAQ's section and didn't find an answer.From what I read there I believe it says this topper was made in 1974.Thanks!
Logged

Offline Highbrass

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: survivor stock on old topper
« Reply #1 on: January 31, 2010, 11:08:56 AM »
Oh well... ???....I'll just try my luck.Thanks anyhow.
Logged

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: survivor stock on old topper
« Reply #2 on: January 31, 2010, 11:11:21 AM »
I have an old Topper barrel and it takes a different screw than the survivor thumb screw. The thread pitch is different. I'm sure you could use the forearm itself but the screw might be a different story. I think the stock should bolt right on.



Spanky
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: survivor stock on old topper
« Reply #3 on: January 31, 2010, 11:15:19 AM »
I had an M158 30-30(1972 AJ), tried a modern stock on it, it didn't fit right, the angle of the stock was slightly different and left a slight gap.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: survivor stock on old topper
« Reply #4 on: January 31, 2010, 11:18:32 AM »
Quote from: quickdtoo on January 31, 2010, 11:15:19 AM
I had an M158 30-30(1972 AJ), tried a modern stock on it, it didn't fit right, the angle of the stock was slightly different and left a slight gap.

Tim


Tim,

Is the screw for the forearm different? The one on my Topper barrel has a different pitch.



Spanky
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: survivor stock on old topper
« Reply #5 on: January 31, 2010, 11:45:11 AM »
The survivor buttstock SHOULD fit but the only way to be sure is to try one, 90%+ chance it will fit. When you buy a Survivor stock set from Choate it comes with 2 special "Storarm forearm" screws, to fit both the old and the new thread pitch. If you call Choate you can get whichever screw you need.....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: survivor stock on old topper
« Reply #6 on: January 31, 2010, 11:59:40 AM »
Quote from: Spanky on January 31, 2010, 11:18:32 AM
Quote from: quickdtoo on January 31, 2010, 11:15:19 AM
I had an M158 30-30(1972 AJ), tried a modern stock on it, it didn't fit right, the angle of the stock was slightly different and left a slight gap.

Tim


Tim,

Is the screw for the forearm different? The one on my Topper barrel has a different pitch.



Spanky

Looks like Andy answered that for ya, that's good cuz I didn't know the answer on the forend, mine had a ¼-20 attachment screw, some older barrels use a ¼-28 fine thread.  I didn't like the Survivor stock and got rid of mine after I tried it on my Hornet, I traded it for a good stock!!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Highbrass

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: survivor stock on old topper
« Reply #7 on: February 07, 2010, 11:20:39 AM »
Thanks for the replies guys.I ordered the stock but haven't recieved it yet.I'll update as soon as I recieve.Thanks again.
Logged
Pages: [1]   Go Up
« previous next »