« previous next »
Pages: [1]   Go Down

Author Topic: Steel Tube Stock  (Read 799 times)

0 Members and 1 Guest are viewing this topic.

Offline smokemjoe

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 237
Steel Tube Stock
« on: February 13, 2010, 03:39:39 AM »
I can get a  tube that is 4 in. round and a 1- 7/8s bore X 5 foot long, What could be it made into and what about a mold or what to shoot in it. Thanks.
Logged

Offline Soot

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 391
Re: Steel Tube Stock
« Reply #1 on: February 13, 2010, 06:19:17 AM »
You need to know what it is besides steel, 1018, 4140, DOM, seamless etc.
Logged

Offline smokemjoe

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 237
Re: Steel Tube Stock
« Reply #2 on: February 13, 2010, 07:05:55 AM »
its 1018 seamless.
Logged

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Steel Tube Stock
« Reply #3 on: February 13, 2010, 07:14:33 AM »
You would have to make a chambered breech plug or sleeve reinforce the area over the chamber to have a barrel that met the forum safety recommendations.  Otherwise, the wall thickness is too thin.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Steel Tube Stock
« Reply #4 on: February 14, 2010, 09:52:43 AM »
Quote from: smokemjoe on February 13, 2010, 07:05:55 AM
its 1018 seamless.

1018 is GOOD.  Strong, will handle both the pressures and the repition.

Seamless is GOOD.  Does not have porosity where products of combustion will eat away and eventually cause a KABOOM.

Material - OK, now the design.
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline shotgun31

  • Trade Count: (1)
  • Member
  • *
  • Posts: 91
  • Gender: Male
Re: Steel Tube Stock
« Reply #5 on: February 14, 2010, 01:41:27 PM »
You could make 2 (yes 2) .40 scale Dahlgren Boatguns, 27.4" long tube!  Fit a breechplug, with round cascabel;  thread the cascabel with 7/8X6 Acme thread....
Shotgun
Logged

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Steel Tube Stock
« Reply #6 on: February 14, 2010, 04:31:04 PM »
Quote from: shotgun31 on February 14, 2010, 01:41:27 PM
You could make 2 (yes 2) .40 scale Dahlgren Boatguns, 27.4" long tube!  Fit a breechplug, with round cascabel;  thread the cascabel with 7/8X6 Acme thread....
Shotgun


How does he deal with the thin walls of the tube?
Logged

Offline shotgun31

  • Trade Count: (1)
  • Member
  • *
  • Posts: 91
  • Gender: Male
Re: Steel Tube Stock
« Reply #7 on: February 14, 2010, 04:42:11 PM »
Got to chamber the breechplug. 
Shotgun
Logged
Pages: [1]   Go Up
« previous next »