« previous next »
Pages: [1]   Go Down

Author Topic: Question on a Pardner 3" 12ga modified  (Read 573 times)

0 Members and 1 Guest are viewing this topic.

Offline kansasj

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 280
  • Gender: Male
Question on a Pardner 3" 12ga modified
« on: February 15, 2010, 01:10:44 PM »
Recently purchased a 12ga Pardner 3".  Have been shooting Hvy coyote loads recently (ouch) and about 1 out of two shells will not eject.  I only need to lightly drop a wooden dowel in the muzzel end and the shells dislodge---any ideas or advice??
Logged
Yesterday is history--tomorrow is a mystery--today is a gift!---That is why they call it the present!

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Question on a Pardner 3" 12ga modified
« Reply #1 on: February 15, 2010, 02:59:19 PM »
check the FAQ's, perhaps a BB added to the ejector spring might increase the power enough to pop the empty out, also be sure the chamber is dry, and if needed a light clean, polish (4/0 steel wool), and drying of the chamber after might help....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline FLNT4EVR

  • GBO Supporter
  • Trade Count: (8)
  • A Real Regular
  • *****
  • Posts: 603
  • Gender: Male
Re: Question on a Pardner 3" 12ga modified
« Reply #2 on: February 15, 2010, 04:17:10 PM »
I'm not making jokes, try 2 3/4 shells. they kill just as good.
Logged
" Act civilized...even if you ain't " 
 
" I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people , and I require the same from them. "
                                  John Wayne, "The Shootist"

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Question on a Pardner 3" 12ga modified
« Reply #3 on: February 16, 2010, 03:12:33 AM »
Like MSP RET said polish that chamber before you go to the trouble to do anything else.
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: Question on a Pardner 3" 12ga modified
« Reply #4 on: February 21, 2010, 02:26:59 PM »
I had that problem recently with 2 3/4" buckshot. So I bought 3". ;D
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!
Pages: [1]   Go Up
« previous next »