« previous next »
Pages: [1]   Go Down

Author Topic: Hornady 250 gr Leverevolution 450 Bushmaster  (Read 1672 times)

0 Members and 1 Guest are viewing this topic.

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
Hornady 250 gr Leverevolution 450 Bushmaster
« on: February 18, 2010, 03:48:34 AM »
Midway has these bullets on sale for reloading. Does anyone have experience with them as I was wondering how they would perform in my 454 Casull Puma 92. 
Logged
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #1 on: February 18, 2010, 04:00:35 PM »
 No, but I've been thinking of trying some in the muzzle-loader. I do have a many year supply of m-l bullets though so I've been holding off.

 You could start by looking over their website & see what kind of data they have for your potential loading.
Logged
NRA, Veteran

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18278
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #2 on: February 19, 2010, 01:36:04 AM »
buddy tried them in his 450 and said they were tack drivers. dont know that they would be much of a hunting bullet at those speeds though. I would think that they wouldnt hold together.
Logged
blue lives matter

Offline Flashole

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #3 on: February 20, 2010, 02:05:57 AM »
I got two boxes not knowing there was not a crimp groove.  I was planning to try them in my 45lc & 454 puma also.  If you have not laoded these types of bullets they take some extra care in getting the proper length to feed.  The 45-70 and 444 require a significant amount of case trimming.


=FLASH=
Logged
=FLASH=

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #4 on: February 20, 2010, 02:37:37 AM »
I got a couple boxes when they first came out. I turned some canalures in them and they shoot very well in the 454 and Colt cartridges. But I haven't done any expansion tests...

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Flashole

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #5 on: February 20, 2010, 10:40:14 AM »
CW,  if you don't mind me asking.  How did you turn a canalure?   I have not tried to see at what length they will feed.  I was going to see it I could just seat them deep enough to cycle and use a lee factory crimp tool.

=FLASH=
Logged
=FLASH=

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #6 on: February 20, 2010, 01:44:00 PM »
 I have a C&H tool that mounts on the bench and allows infineate adjustments to turn a canalure on any bullet.










CW



Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Flashole

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #7 on: February 21, 2010, 07:32:25 AM »
Thanks for the video,  never knew there was a tool you could get to do this job.  I found one at Buffalo Arms.  It was cheaper than I thought it would be.  I reload a lot, 17 die sets an 25 guns but so far it has been real simple work.  Just buy the components and find what combination work best.  That's why these FTX bullets seemed to be more trouble than their worth but help from guys like you it's like finding an other level to enjoy this sport.

=FLASH=
Logged
=FLASH=

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: Hornady 250 gr Leverevolution 450 Bushmaster
« Reply #8 on: February 21, 2010, 11:07:19 AM »
I picked up a couple of boxes to try in the 454 as well.  If to long, may try 45 Colt brass in the 454 Puma's, or the Handi's.  CW, when you reamed your Handi to 454, did that give you much of a throat, or just the chamber?  I was just gonna use a Lee Factory Crimp die for locking them in.  Let us know if you get any expansion testing done CW.  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?
Pages: [1]   Go Up
« previous next »