« previous next »
Pages: [1]   Go Down

Author Topic: Red dot for big bore ?  (Read 2618 times)

0 Members and 1 Guest are viewing this topic.

Offline 10gaugeMS^_^

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Red dot for big bore ?
« on: December 14, 2010, 02:19:00 PM »
IS there a redot tough enough for the big bore like the 460 wby ? i figured it probably would brake a fastfire . i was wondering about these

http://www.midwayusa.com/viewProduct/?productNumber=779670


http://www.midwayusa.com/viewProduct/?productNumber=813084


i really like the looks and price of a burris fastfire. i mean it can stand up to the recoil of 3.5 12 ga mag which is around 70 ft lbs but i dont know if the accubrake works like advertised . only things i really know are things i find out myself
Logged
In theory its sound ",but in practice its flawed

Offline 10gaugeMS^_^

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Re: Red dot for big bore ?
« Reply #1 on: December 14, 2010, 07:37:53 PM »
i really like the trijicon acog i just emailed them and asked if it can withstand the 460 wby recoil . and if i could still get the acogs with bible verses at serail number .i like the amber cheveron

http://www.opticsplanet.com/reviews/reviews-trijicon-ta31f-acog-4x32-scope-red-chevron-reticle-ta51-mount.html

it would be 6 months apart though buying the scope and rifle
Logged
In theory its sound ",but in practice its flawed

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18262
Re: Red dot for big bore ?
« Reply #2 on: December 19, 2010, 01:22:06 AM »
for something that kicked like that about the only choice i would make is an aimpoint
Logged
blue lives matter

Offline 10gaugeMS^_^

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Re: Red dot for big bore ?
« Reply #3 on: December 19, 2010, 04:29:58 PM »
From Wat I've been reading a ultradot will do anything maybe more than the 400+$ reddots.
Logged
In theory its sound ",but in practice its flawed

Offline 500 A-SQUARE

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
  • My small bore is a 375 H&H
Re: Red dot for big bore ?
« Reply #4 on: February 28, 2011, 02:10:44 PM »
A red dot would be Awsome for a Dangerious game rifle, I though about putten on on my ruger #1 500 A-square but it looks like a guy needs weaver bases to mount one. How about a Halo sight???
Logged
Ruger #1 .500 A-Square
Ruger 77 416 Ruger
Remington 700 375 H&H
Weatherby MK 5 458 winny
S&W X frame 500 4 inch

Offline Capt Gary

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 163
Re: Red dot for big bore ?
« Reply #5 on: August 05, 2011, 03:41:59 AM »
I put my Fastfire II on my Encore Katadin 45/70 (very light rifle) and sighted in with some right stiff loads. Worked very well and seems to be holding up. Looking forward to poking a whitetail with it in Nov. in VA.
Logged

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 921
  • Gender: Male
  • Retired and livin the dream !
Re: Red dot for big bore ?
« Reply #6 on: September 07, 2011, 04:07:09 AM »
  I also have a Fastfire mounted on a light 44 mag carbine and like it alot.
Due to there locking adjustments for windage and elevation I would think this type of red dot to be best for heavy recoil.
They are built to withstand recoil from the heaviest handguns and with there light weight ( less than 2 OZ. ) the fastfire is a very solid sight.
Logged
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,

Offline AkMike1

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 150
Re: Red dot for big bore ?
« Reply #7 on: September 07, 2011, 07:24:51 PM »
Sometime soon I'm going to put a FastfireII on my Ruger #1 rechambered to 450 Nitro Express. I have no doubt that it'll work fine. Afterall if it'll stand up to the fast slapping of a semi-auto handgun it'll work fine for the push of a rifle.
 I'm sure that it'd even stand up to my 600 Nitro IF I could figure out a way to attach it w/o drilling holes. Duct Tape? ;)
Logged
AkMike

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Re: Red dot for big bore ?
« Reply #8 on: September 08, 2011, 01:03:08 AM »
Have a fast fire mounted on a 45 acp slide - about 1000 rounds, no problems.  Think I read they are rated at 1000 G's.  Ultradots are good as well, the one on my Redhawk has been there for thousands of heavy loads, no problems.  The cream of the crop would be Aimpoint, expensive, but if you have a 460 Wby, you should be able to afford it.... :)
 
Larry
Logged
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Red dot for big bore ?
« Reply #9 on: September 08, 2011, 07:01:26 AM »
Mike
Duct Tape= No  JB Weld maybe  ;)
Logged
What is the point of Life if you can't have fun.

Offline Hizzie

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: Red dot for big bore ?
« Reply #10 on: September 16, 2011, 04:06:09 PM »
At that recoil level only a Trijicon or Aimpoint would likely survive.
Logged

Offline Hizzie

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: Red dot for big bore ?
« Reply #11 on: September 16, 2011, 07:43:31 PM »
Quote from: 500 A-SQUARE on February 28, 2011, 02:10:44 PM
A red dot would be Awsome for a Dangerious game rifle, I though about putten on on my ruger #1 500 A-square but it looks like a guy needs weaver bases to mount one. How about a Halo sight???

Burris makes a Ruger mount for the Fastfire.
Logged

Offline AkMike1

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 150
Re: Red dot for big bore ?
« Reply #12 on: September 17, 2011, 05:54:13 PM »
Burris makes a Ruger to Weaver munt. Is this what you mean?
Logged
AkMike

Offline JWP58

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 146
Re: Red dot for big bore ?
« Reply #13 on: September 18, 2011, 02:23:49 PM »
AIMPOINT!
 
I suggest a Micro model. Yes they are exspensive, but they are worth every penny.......
 
http://www.youtube.com/watch?v=89HEefl1KI4
 
If an Aimpoint Micro can handle that, it will handle ANY recoil your rifle can dish out.
Logged

Offline Hizzie

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: Red dot for big bore ?
« Reply #14 on: September 18, 2011, 07:51:53 PM »
Quote from: AkMike1 on September 17, 2011, 05:54:13 PM
Burris makes a Ruger to Weaver munt. Is this what you mean?

No.  Burris makes a mount that clamps down on a Ruger scope base dovetail.  http://www.midwayusa.com/viewProduct/?productNumber=898165
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18262
Re: Red dot for big bore ?
« Reply #15 on: September 19, 2011, 02:59:18 AM »
i once watched a you tube video where two guys from aimpoint were shooting on a parking lot. they would take there aimpoints off there ars and bounce them back and forth accross the pavement and put them back on there guns and they held zero. I wonder how many of the cheaper sights that everyone claims are just as good could take that kind of punishment!! They repeated it 3 times and alothough the units were looking pretty beat up they still functioned perfectly and held zero! the other cool thing about them that none of the others come close to is battery life. Ive got comp 2s that have been left on for 2 years with the same batterys and comp 3s and comp 4s will double and tripple that. Piece of mind in the hunting field when you know you dont have to turn off and on an optic and you ABSOULTELY know that the batterys arent going to let you down. IMO its one thing that truely fits the saying "you get what you pay for"
Logged
blue lives matter
Pages: [1]   Go Up
« previous next »