« previous next »
Pages: [1]   Go Down

Author Topic: ML Breech plug threads?  (Read 579 times)

0 Members and 2 Guests are viewing this topic.

Offline huli

  • GBO Supporter
  • Trade Count: (26)
  • Contributor
  • *****
  • Posts: 264
ML Breech plug threads?
« on: January 29, 2010, 11:43:21 AM »
When you order a brecchplug for a Muzzleloader and it has 3/4 16 Threads, Is this a standard Tap or is it a special Pitch????? I have a shutgun Barrel that i want to thread and install a breech plug in.. Thanks to any and all answers,,Steve
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: ML Breech plug threads?
« Reply #1 on: January 29, 2010, 01:22:56 PM »
The threads are what they say and are not something special to the gunsmith. Breech plugs are usually threaded based on the bore size and the barrels diameter. Shotguns pose special thrills with the sometimes thins walls left after the sizing and tapping for the plug.. Good luck and keep us informed..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline huli

  • GBO Supporter
  • Trade Count: (26)
  • Contributor
  • *****
  • Posts: 264
Re: ML Breech plug threads?
« Reply #2 on: January 29, 2010, 04:12:55 PM »
Thanks Gunnut,,This barrel was intended for a ML,I Think, it  Measures 1.25 at the breech and the bore is .640 I think it has enough beef. But i will check it real good after threading Thanks steve
Logged

Offline Screwbolts

  • Trade Count: (0)
  • Member
  • *
  • Posts: 62
  • Gender: Male
Re: ML Breech plug threads?
« Reply #3 on: January 30, 2010, 01:49:24 AM »
When I made the 12 ga. barrel for my H&A Underhammer I had to go to 7/8 x 14 thread.   being your bore is .640 you may be able to use a 3/4 x 16 thread Ok.  I like to have a shoulder in the bore for the BP to seat against.   I Haven't taken the time to look up the minor dia. of your desired thread. 1/2 the difference of your bore and the Minor dia. of the thread will be the max surface of this shoulder.  

Screwbolts

CNY
Logged
Ken
Central NY

ΜΟΛΩΝ ΛΑΒΕ

All The “Rat Bastards” In DC Know Obama Is Not Eligible

Boolitz = as God laid it into the soil,,grand old Galena,the Silver Stream graciously hand poured into molds for our consumption.

Bullets = Machine made utilizing Full Length Gas Checks as to provide projectiles for the masses.

Offline huli

  • GBO Supporter
  • Trade Count: (26)
  • Contributor
  • *****
  • Posts: 264
Re: ML Breech plug threads?
« Reply #4 on: January 30, 2010, 12:21:42 PM »
I have re-thought the process and decided to have a Professional do it ,, But will have to find one. Know of someone??? May be cheaper to buy a Barrel with breechplug installed already?? Thanks Steve
Logged

Offline JonD.

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 1118
  • Gender: Male
Re: ML Breech plug threads?
« Reply #5 on: March 14, 2010, 09:15:15 AM »
a 3/4 -16 is a standard fine thread tap. Use an 11/16" drill bit.
Logged
Pages: [1]   Go Up
« previous next »