Author Topic: I just finished the renegade winter project  (Read 957 times)

0 Members and 3 Guests are viewing this topic.

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
I just finished the renegade winter project
« on: February 10, 2010, 11:10:05 AM »
I just finished the winter project on the renegade 54 cal with the custom barrel from t/c 1 in 66 round ball barrel twist
I have to go with fiber optic only because the eyes are not what they used to be.I just may take some rubbing coupound to cut the finish a little .I used about 20 coats of Formby's tung oil LOW GLOSS

http://i15.photobucket.com/albums/a380/lonewolf5347/54%20renegade/100_0057.jpg
http://i15.photobucket.com/albums/a380/lonewolf5347/54%20renegade/100_0059.jpg
http://i15.photobucket.com/albums/a380/lonewolf5347/54%20renegade/100_0060.jpg

Offline necchi

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1842
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #1 on: February 10, 2010, 01:56:58 PM »
SWEET! Ya dun that stock proud!

Shoot it yet? Don't git disgruntled till that new barrel git's broke in,,I like to shoot a new barrel for break in,,took about 200 rounds for my GM ta settle down,,but now it's a tack driver,,I wish ya luck workin up a load.
found elsewhere

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Re: I just finished the renegade winter project
« Reply #2 on: February 10, 2010, 02:32:12 PM »
Another thing you could do is get a replacement trigger from Track Of The Wolf.  They have Davis triggers that take about five minutes to switch.  You can sell the old one on Ebay for $20 or so.  You will notice a big difference.  I have a set up much like yours only I have a Green Mountain Long Range Hunter barrel ($95 on closeout).  It shoots 300 grain Hornady XTPs like you would not believe.  Good luck.  nice rifle.

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: I just finished the renegade winter project
« Reply #3 on: February 10, 2010, 02:35:31 PM »
I hope she will tack drive RB being a 1 in 66 twist deep groove barrel as soon as the weather breaks I will see and report back.

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #4 on: February 11, 2010, 03:45:58 PM »
I'd get the trigger set from Davis himself.  Saves you a couple of bucks and makes him a couple which Track would get.

-WH-
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #5 on: February 11, 2010, 03:48:00 PM »
My factory triggers work great.  Is that a Truoil finish?
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: I just finished the renegade winter project
« Reply #6 on: February 12, 2010, 05:16:15 AM »
formby's tung oil low gloss

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: I just finished the renegade winter project
« Reply #7 on: February 12, 2010, 11:44:14 AM »
Nice job on the Renegade.

Depends what you're going for I guess, but I like pure tung oil better than a linseed blend like TruOil because it doesn't darken with age as much as the later does and it has better water proofing properties.
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #8 on: February 12, 2010, 02:01:41 PM »
The best I've ever use is Minwax Tung Oil Finish.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Lawful Larry

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 849
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #9 on: February 23, 2010, 09:08:08 AM »
Nice work and I hope you long and happy times with her in the woods. 

I was lucky to get my hands on a TC Big Boar in 58 cal.  It was new, without the box, and unfired.  It shoots a PRB the best so far.  These shots on the three targets were at 100 yds:
 



It has a 1 in 48" twist, but I can't find a conical it likes just yet.  The PRB target has five shot group in the upper left corner.  The next target was one shot on the PRB target and one on the Maxihunter target.  Really bad grouping on the Maxiballs.  The Maxihunter didn't do much better!!!  But that is really all the fun of trying. 

Here is Baby:







As of right now I am very happy with her!

Just another voice in the crowd!!!

 

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: I just finished the renegade winter project
« Reply #10 on: March 11, 2010, 05:36:52 AM »
I did get to the range the other day
The first 2 shot low right 70 grains of 3F
The next 2 shots a little high 80 grains and a wad under the patched r/b
The last 3 or 4 in the same group 90 grains with no wad
The gun was shot of shooting sticks at the 50 yd. mark
first 2 shots low then next 2 high using a wad.The last 3or 4 in the cluster with 90 grains of 3F

 http://i15.photobucket.com/albums/a380/lonewolf5347/100_0093.jpg


Offline Lawful Larry

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 849
  • Gender: Male
Re: I just finished the renegade winter project
« Reply #11 on: March 11, 2010, 05:47:49 AM »
I did get to the range the other day
The first 2 shot low right 70 grains of 3F
The next 2 shots a little high 80 grains and a wad under the patched r/b
The last 3 or 4 in the same group 90 grains with no wad
The gun was shot of shooting sticks at the 50 yd. mark
first 2 shots low then next 2 high using a wad.The last 3or 4 in the cluster with 90 grains of 3F

 http://i15.photobucket.com/albums/a380/lonewolf5347/100_0093.jpg


It looked good to me.  Looks like you got a shooter on your hands and what makes it special is you had a hand in its making.  Good on you and good shooting!

Just another voice in the crowd!!!