« previous next »
Pages: [1]   Go Down

Author Topic: 8mm IHMSA  (Read 2071 times)

0 Members and 1 Guest are viewing this topic.

Offline WSM264

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 114
8mm IHMSA
« on: July 21, 2011, 05:29:22 AM »
I am looking for load data for the 8 IHMSA.  One book I have says it used 308 brass necked up and trimmed.  Another source says it is a 300 Savage necked up with a 38* shoulder.
I would like to know the parent case, load data with heavy (200gr +) bullets and where to find dies.
If anybody has a used set of dies that they want to part with - that would be great!!
Logged
No firearm sales to folks in socialist states. Including, but not limited to, PA, MD, NJ, NY, MA, IL, CA, HI.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: 8mm IHMSA
« Reply #1 on: July 21, 2011, 06:19:02 AM »
Check with Bullberry barrels
Logged
If ya can see it ya can hit it !

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: 8mm IHMSA
« Reply #2 on: July 25, 2011, 03:35:31 AM »
.300 Savage brass is the easiest to use, but .308 Win. brass can also be used 7 trimmed a bit. The IHMSA published a loading book about 30 years ago. The Gun Digest Book of Metallic Silhouette Shooting, Ed. 1 may also have some loads.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: 8mm IHMSA
« Reply #3 on: July 25, 2011, 03:42:22 AM »
If you can find a copy of SHOOTING STEEL it might have some load data.
Logged
If ya can see it ya can hit it !

Offline WSM264

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 114
Re: 8mm IHMSA
« Reply #4 on: July 25, 2011, 05:14:13 AM »
I've got Metallic Sil Shooting 2nd Edition and it doesn't have any data.
Logged
No firearm sales to folks in socialist states. Including, but not limited to, PA, MD, NJ, NY, MA, IL, CA, HI.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: 8mm IHMSA
« Reply #5 on: July 25, 2011, 05:15:16 AM »
I was thinking shooting steel might
Logged
If ya can see it ya can hit it !

Offline 19 Turkeys

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 121
Re: 8mm IHMSA
« Reply #6 on: July 26, 2011, 06:20:37 AM »
Contact Wichita, they developed the IHMSA line of chamberings using the 220 Russian.  See their website below.


http://www.wichitaarms.com/history.asp


Steve W.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: 8mm IHMSA
« Reply #7 on: July 29, 2011, 08:45:13 AM »
I found imformation on the 8 mm international. I'm thinking its the same but there were alot of wildcats back then. The 8 mm int as were the other IMHSA rounds were by Elgin Gates and built by him and other gunsmiths back in 75 -80's before any company picked them up.
Logged
If ya can see it ya can hit it !

Offline WSM264

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 114
Re: 8mm IHMSA
« Reply #8 on: July 31, 2011, 11:25:11 AM »
SHOOTALL PM inbound
Logged
No firearm sales to folks in socialist states. Including, but not limited to, PA, MD, NJ, NY, MA, IL, CA, HI.
Pages: [1]   Go Up
« previous next »