« previous next »
Pages: [1]   Go Down

Author Topic: trimming .357 max brass to 360 Dan Wesson  (Read 2018 times)

0 Members and 1 Guest are viewing this topic.

Offline kmbrown

  • GBO Supporter
  • Trade Count: (6)
  • Member
  • *****
  • Posts: 95
  • Gender: Male
trimming .357 max brass to 360 Dan Wesson
« on: April 03, 2010, 02:40:01 PM »
Just picked up a .357 mag SB1 handi today.  I've got some max brass that I bought to load for a friend's rifle.  I trimmed one to 360 Dan Wesson length and it chambers just fine.  The problem is, I can't find any 360 brass.  Can I trim the max brass to fit or will it be too thick?  I know that the easiest thing to do will be to ream to max.  I plan to do that but this would get me shooting sooner.  I'm also kinda curious to see what the velocity differences are between the three cartridges.
Logged

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #1 on: April 03, 2010, 03:29:27 PM »
 It is possible to trim maxie to 360 D W but lot of work. They have reamer
 Up in the Fax  Quick has a reamer Lot cheaper Than 360 Brass.
 Just seams a waste time to trim brass. Take care .  Datil
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #2 on: April 03, 2010, 03:39:33 PM »
Marv, Amen Bro...

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #3 on: April 04, 2010, 06:43:53 AM »
Generally speaking we like to fill a chamber with as long of brass as possible to minimize the jump of the bullet unsupported into the leade. But...so many guys are having such good luck with their rechambered Max's even shooting .38SPL and .357Mag, way short by that standard, that I would save that brass for if/when you decide to rechamber too. Shoot it with the regular cases for now and only trim those if you cant get anything else to work. Accurracy in that cal. does not seem to be case length critical.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #4 on: April 04, 2010, 07:48:38 AM »
I know when I had my .357 the chamber was so long that I could trim just a little off the Max brass and it fit very well and was longer than the 360 brass I had. I did not see enough differance to chamber to max .Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline Redcap

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 127
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #5 on: April 04, 2010, 03:59:39 PM »
I think that Starline used to sell 360 brass.  You might want to check them out.
Logged

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #6 on: April 04, 2010, 04:30:10 PM »
kurt,
i found the same thing a few years back with a chamber cast. longer than dan and shorter than max...
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #7 on: April 04, 2010, 04:51:54 PM »
Starline only makes it occasionally, it's backordered.

Tim

http://www.starlinebrass.com/index.php?cPath=1
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #8 on: April 04, 2010, 05:25:08 PM »
Reed's ammo on this forum had some a while back.  I trim my maxi brass, but it doesn't have to be cut to 360 length.  My 357 had obviously a longer  than normal throat.  I use the Lee trimmer and a cordless drill, I made my own stem for the case trimmer so all of the cases are uniform.  I really need to sign up for the reamer, but just haven't done it yet.....
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #9 on: April 04, 2010, 05:29:25 PM »
I had to trim 360 brass .010" to fit in mine, it's a Maxi now, the 180gr Speer FP is touching the lands at 2.3"!!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #10 on: April 04, 2010, 05:47:00 PM »
Quote from: quickdtoo on April 04, 2010, 05:29:25 PM
I had to trim 360 brass .010" to fit in mine, it's a Maxi now, the 180gr Speer FP is touching the lands at 2.3"!!

Tim

Yep, that's what I'm trimming as well...it's so close to Maxi I keep talking myself into and out of the ream......
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline kmbrown

  • GBO Supporter
  • Trade Count: (6)
  • Member
  • *****
  • Posts: 95
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #11 on: April 04, 2010, 05:59:37 PM »
Thanks for all the insight.  The gun is definitely going to be reamed to max.  I just thought I could squeeze a little more power out of it before it gets reamed.  I trimmed a case to 1.42" to get it to chamber.  Nobody has 360 brass.  I've ordered 200 max cases so I may just trim a few to play with.  Cabelas had max brass in stock yesterday for $25 per 100 if anyone needs any.
Logged

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #12 on: April 04, 2010, 06:07:07 PM »
You might contact these folks just to see.  It isn't listed, but it was not when I bought some from them.  Very nice to deal with.

Ben

http://shop.reedsammo.com/main.sc
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline kmbrown

  • GBO Supporter
  • Trade Count: (6)
  • Member
  • *****
  • Posts: 95
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #13 on: April 04, 2010, 06:11:35 PM »
Out of curiousity, What kind of velocity difference would I see between the 360 and the max?
Logged

Offline bajabill

  • GBO Supporter
  • Trade Count: (5)
  • A Real Regular
  • *****
  • Posts: 712
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #14 on: April 05, 2010, 04:56:17 AM »
Quote from: quickdtoo on April 04, 2010, 05:29:25 PM
I had to trim 360 brass .010" to fit in mine, it's a Maxi now, the 180gr Speer FP is touching the lands at 2.3"!!

Tim

wow, I have not seen that bullet, but My Horn 180 xtp is only 2.0", loaded to the longest crimp groove choice.  How much of that bullet is held by the case when you are out that far?  I originally was using the deeper seating groove, and then moved it out.  Now I am adjusting loads to account for the larger case capacity I found.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: trimming .357 max brass to 360 Dan Wesson
« Reply #15 on: April 05, 2010, 06:07:28 AM »
Loaded .010" off the lands it's seated .200" in the case, thinking that may not provide sufficient bullet pull, I crimp with the Lee factory crimp die.

Tim

http://www.suitorsgarage.com/gunstuff/35remington/35rempart2.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »