Author Topic: Powder question  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Powder question
« on: April 11, 2010, 02:22:36 AM »
Hi All,

Looking for a cleaner burning powder to load 223 REM for my wife's M4, 16" barrel.  I have been loading 55 grain hornady FMJBTs over 24.3 grain of TAC for the Kids 20" barrel AR15 and they shoot fine and  do not foul up the gun very much.  The exact same load in the short barrel M4 will start having jams after about 75 rounds (no jams on the AR15 after 300 shots).  Tried H4198, because I had some and that was a big mistake, jams after one magazine and the internals looked like the gun had been in a fire.  Any suggestions for cleaner powder for this short barrel weapon? 

thanks

BB
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline kctibs

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 244
  • Gender: Male
Re: Powder question
« Reply #1 on: April 11, 2010, 03:58:26 AM »
I have excellent luck with H335 and BL-C2. Also a have used Varget with good results.
"Where liberty dwells, there is my country."
-- Benjamin Franklin

Offline necchi

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1842
  • Gender: Male
Re: Powder question
« Reply #2 on: April 11, 2010, 04:50:21 AM »
Varget, at least it don't foul the bore like other's I've tried, Great results with 40-55grn bullets. ;D
found elsewhere

Offline gary0529

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Re: Powder question
« Reply #3 on: April 11, 2010, 05:53:07 AM »
AA2230 or Data 68 Powder (if you happened to nab some a while back)-
Clean, good groupings with 50 through 68 gr.

Lots of load data on Accurate Powder site.
Try it.

Gary

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Powder question
« Reply #4 on: April 11, 2010, 08:39:10 AM »
Thanks for input.  Will try Varget with 55 grain .224s next since I can find that powder.  Been looking for the 2230 for a while but no luck, want to try it in my 45 70.
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18278
Re: Powder question
« Reply #5 on: April 12, 2010, 02:52:15 AM »
try bumping your powder charge up a 1/2 a grain at a time and see if that helps it burn cleaner. Your shooting it at a farily mild level. If that doesnt help try aa2230.
blue lives matter