Author Topic: 500 S&W cast loads, need info  (Read 371 times)

0 Members and 1 Guest are viewing this topic.

Offline manatee1947

  • Trade Count: (13)
  • Contributor
  • ***
  • Posts: 481
  • Gender: Male
500 S&W cast loads, need info
« on: May 09, 2010, 06:54:07 PM »
I am seeking any information on cast loads for the Lee 440 gr bullet with  Unique, Blue Dot, 2400, or XMP 5744 & SR 4759. I want to work up loads in the 1100/ 1400 fps range. I have seen 495 gr cast loads with 18 -20 gr of Blue Dot, 10 gr of Unique, or 38 gr of 5744 with the 440 bullet. If anyone has personal experience, or links to load data, I would certainly appreciate them sharing the info. Thanks.
remember the starfish

Offline manatee1947

  • Trade Count: (13)
  • Contributor
  • ***
  • Posts: 481
  • Gender: Male
Re: 500 S&W cast loads, need info
« Reply #1 on: May 10, 2010, 05:24:44 PM »
Since I have no replies, I am going to check with the black powder replica shooters, seems like any load for a 50-70 should be safe and usable in a 500 S&W handi ??
remember the starfish

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
Re: 500 S&W cast loads, need info
« Reply #2 on: May 11, 2010, 02:09:46 AM »
Try the online site The reloading pages of M D Smith at www.reloadammo.com. Some of the loads you mentioned are there.
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline manatee1947

  • Trade Count: (13)
  • Contributor
  • ***
  • Posts: 481
  • Gender: Male
Re: 500 S&W cast loads, need info
« Reply #3 on: May 11, 2010, 02:49:15 AM »
thanks.
remember the starfish

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: 500 S&W cast loads, need info
« Reply #4 on: May 11, 2010, 09:36:07 AM »
You can safely use jacketed data with cast bullets if the cast bullets will stand the velocity. Accurate Powders also list some loads for cast bullets in their manual which you can down load for free at www.accuratepowder.com.