« previous next »
Pages: [1]   Go Down

Author Topic: What are these?  (Read 1913 times)

0 Members and 1 Guest are viewing this topic.

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
What are these?
« on: February 13, 2010, 12:44:51 PM »
I bought a box lot of reloading equipment and found these. They resemble drill guides and have an inside diameter of .204 and .219 The aluminum knurled housing has set screws to hold the high carbon steel inserts and I'm really stumpped about their purpose.

Logged
What doesn't kill us, makes us stronger!

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: What are these?
« Reply #1 on: February 13, 2010, 05:55:37 PM »
Just a wild guess but I would say they are depth stops for throating reamers.  One for a  .204 ruger and one for a 22 RF.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
Re: What are these?
« Reply #2 on: February 14, 2010, 02:05:13 AM »
Quote from: trotterlg on February 13, 2010, 05:55:37 PM
Just a wild guess but I would say they are depth stops for throating reamers.  One for a  .204 ruger and one for a 22 RF.  Larry

a good guess but I've owned them for almost 5 years before the 204 was marketed.
Logged
What doesn't kill us, makes us stronger!

Offline roper

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
Re: What are these?
« Reply #3 on: February 14, 2010, 05:13:54 AM »
Quote from: Flash on February 14, 2010, 02:05:13 AM
Quote from: trotterlg on February 13, 2010, 05:55:37 PM
Just a wild guess but I would say they are depth stops for throating reamers.  One for a  .204 ruger and one for a 22 RF.  Larry

a good guess but I've owned them for almost 5 years before the 204 was marketed.
 

There was alot of 20 cal before the 204Ruger http://www.6mmbr.com/20Caliber.html#TAC20
Logged

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
Re: What are these?
« Reply #4 on: February 14, 2010, 06:33:10 AM »
The guy I bought them from really wasn't that sort. If the local gun shop didn't have it, he didn't. The knurled knob has an indexing mark on it which wouldn't be consistant with a bore guide, at least in my opinion. I've searched high and low for something like them on the auction sites but with no luck.
Logged
What doesn't kill us, makes us stronger!

Offline Tommyt

  • Trade Count: (51)
  • Senior Member
  • *****
  • Posts: 3051
  • Gender: Male
Re: What are these?
« Reply #5 on: February 14, 2010, 05:29:15 PM »
Send a Picture to Midway ??
Larry Potterfield Just may have an answer

Tommyt
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: What are these?
« Reply #6 on: February 14, 2010, 05:43:43 PM »
Ever think they are just knobs?  Does the hole go all the way through or are they just knobs off some old Radio?  Do they look anythig like these?  Larry

Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
Re: What are these?
« Reply #7 on: February 16, 2010, 12:06:24 PM »
No, they aren't knobs. they are in their own plastic cases, the hole goes all the way through, the insert is high carbon(very hard)steel and held in plase with set screws. The knurled outside ring does have an indexing mark that would resemble a radio knob but that mark serves some purpose other than tuning a radio. The outside diameter of the insert is the same for each but the inside is what's different.
Logged
What doesn't kill us, makes us stronger!

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: What are these?
« Reply #8 on: February 16, 2010, 07:25:34 PM »
Perhaps a way over engineered cleaning rod guide? They look almost like rim thickness guages for rimfire ammo but of course the bore diameters of the inserts are way wrong..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline 041gun

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: What are these?
« Reply #9 on: February 21, 2010, 09:41:13 PM »
looking at them they seem to be a neck gauges to ensure the inner and outer neck thickness is concentric. Thats my guess good luck
Logged

Offline S.S.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2840
Re: What are these?
« Reply #10 on: March 04, 2010, 05:11:53 PM »
looks like the lock nuts on my reloading dies?
Logged
Vir prudens non contra ventum mingit
"A wise man does not pee against the wind".

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: What are these?
« Reply #11 on: March 05, 2010, 05:31:26 PM »
The inserts look like drill bushings but the holders doen't look right. Perhaps they're inside neck reamer guide bushings..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline charles p

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2374
  • Gender: Male
Re: What are these?
« Reply #12 on: March 06, 2010, 06:15:38 AM »
Could they be the adjustable stops for a trim tool?.  

Just looked at the picture again.  What I thought they might be, would require a hole all the way through, so that they could slide up and down a rod and be locked with a set screw.
Logged

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Re: What are these?
« Reply #13 on: March 07, 2010, 01:11:19 PM »
Are they Hornady Lock and Load Comparators that would attach to a micrometer?  ???   Made to measure to ogive of bullet?  ???  Did you find another piece, maybe red anodized aluminum?
See page 9 of the March Midway flier.  Sure look like they could be those. ;)
Did I win?  ;D 
Logged

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
Re: What are these?
« Reply #14 on: March 09, 2010, 02:25:54 PM »
Nope, not those either. I looked on the Midway web site and they're not even close. A drill bushing of sorts would be my closest guess but still not completely sold on that idea. :-\
Logged
What doesn't kill us, makes us stronger!

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: What are these?
« Reply #15 on: March 15, 2010, 07:14:37 PM »
I'd say they're scrap metal. :)



Spanky
Logged

Offline gstewart44

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1645
  • Gender: Male
Re: What are these?
« Reply #16 on: May 13, 2010, 10:12:27 AM »
Quote from: Spanky on March 15, 2010, 07:14:37 PM
I'd say they're scrap metal. :)



Spanky
targets for an accurate varmint rifle ;D
Logged
I'm just tryin' to keep everything in balance, Woodrow. You do more work than you got to, so it's my obligation to do less. (Gus McCrae)

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: What are these?
« Reply #17 on: May 13, 2010, 10:16:54 AM »
Scale weights ?
Logged
If ya can see it ya can hit it !

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: What are these?
« Reply #18 on: May 13, 2010, 10:32:43 AM »
How about Baker Drill stop collars ?
Product code 481402 At Midway USA
Forget the scale weight thing  ;D
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »