Author Topic: What size for a 327  (Read 389 times)

0 Members and 1 Guest are viewing this topic.

Offline dj_in_md

  • Trade Count: (17)
  • Member
  • *
  • Posts: 62
What size for a 327
« on: May 23, 2010, 11:51:49 AM »
I'm going to be casting for a 327 and see moulds in .311 to .314. Which do I use and size to?

Offline BCall

  • Trade Count: (45)
  • Avid Poster
  • **
  • Posts: 232
Re: What size for a 327
« Reply #1 on: May 23, 2010, 04:20:04 PM »
Gonna depend on what your barrel and cylinder measure. I would start with .314, you can always size down, but getting more size is a bit tougher. I don't have a 327, but with my 32's I have had much better success at around .313. Billy

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18247
Re: What size for a 327
« Reply #2 on: May 24, 2010, 02:18:01 AM »
ive allways done 32 mag and 32 special to 312 and the 327 should be no different. theres not a big need to size overized for the 32s For the most parts the guns are build right and dont need overly large bullets.
blue lives matter

Offline mdi

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 399
  • Gender: Male
Re: What size for a 327
« Reply #3 on: May 24, 2010, 06:56:32 AM »
Quickest way to know for sure is to slug your barrel.