« previous next »
Pages: [1]   Go Down

Author Topic: RCBS seating stems  (Read 902 times)

0 Members and 1 Guest are viewing this topic.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
RCBS seating stems
« on: May 27, 2010, 07:00:59 PM »
Are their pistol-caliber seating stems hardened? Can they be machine-out to allow seating of tipped bullets without deformation?

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
Re: RCBS seating steams
« Reply #1 on: May 27, 2010, 10:50:07 PM »
Might be a question to ask directly of RCBS.
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: RCBS seating steams
« Reply #2 on: May 28, 2010, 12:55:17 AM »
I don't believe that they are. At least mine are not... I was able to modify a couple thru the years...

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline wncchester

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3856
  • Gender: Male
Re: RCBS seating steams
« Reply #3 on: May 28, 2010, 02:59:07 AM »
Hit one with a file. 

If it cuts, you're good to go.  If it skids off, it's hardened and will you need carbide tools to cut it.
Logged
Common sense is an uncommon virtue

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: RCBS seating steams
« Reply #4 on: May 28, 2010, 04:51:06 AM »
Thanks for the info! I, too, have altered one before with the dremel, but I went through several of the stone tips to finish it.

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: RCBS seating steams
« Reply #5 on: May 28, 2010, 06:03:37 AM »
RCBS will make you a stem if you send them a bullet you want to seat.
Logged
If ya can see it ya can hit it !

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: RCBS seating steams
« Reply #6 on: May 28, 2010, 08:40:12 AM »
Call RCBS they probably have what you need and will send them to you for free.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: RCBS seating steams
« Reply #7 on: May 28, 2010, 08:56:35 AM »
I had some bullets when I loaded them for a 357 mag the round HP would flatten out and close the HP . I called them and they said send a bullet and they would make a stem to fit it. RCBS is about the best company to work with , its all about solving any problem you have.
Logged
If ya can see it ya can hit it !

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: RCBS seating steams
« Reply #8 on: May 28, 2010, 11:46:44 AM »
Quote from: SHOOTALL on May 28, 2010, 06:03:37 AM
RCBS will make you a stem if you send them a bullet you want to seat.

Thanks, I will talk to them about it.

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: RCBS seating steams
« Reply #9 on: May 28, 2010, 05:39:12 PM »
I was reading a review on 125-grain Remington .357 HP today.  The review noted that he placed some foil against the bullet seating stem and it prevent damage to the bullet tips.  I came into 500 of the bulk 125 HP the other day and found that review of them timely.  I will try that suggestion when it comes time.

Seems the nose of the bullet is rather soft and the hollow point closes if the loader does not take some sort of action.
Logged
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: RCBS seating steams
« Reply #10 on: May 28, 2010, 07:13:16 PM »
Quote from: Siskiyou on May 28, 2010, 05:39:12 PM
I was reading a review on 125-grain Remington .357 HP today.  The review noted that he placed some foil against the bullet seating stem and it prevent damage to the bullet tips.  I came into 500 of the bulk 125 HP the other day and found that review of them timely.  I will try that suggestion when it comes time.

Seems the nose of the bullet is rather soft and the hollow point closes if the loader does not take some sort of action.

Now that you remind me, I did have problems when seating XTPs into the 45LC, the hollow-points were closing on me too.  :-\  I'll post a follow up after I speak to RCBS, maybe they have encountered this before and have a "solve-all" solution.

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: RCBS seating steams
« Reply #11 on: May 28, 2010, 08:49:46 PM »
Logged
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline nicholst55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: RCBS seating steams
« Reply #12 on: May 29, 2010, 03:13:42 AM »
Quote from: Siskiyou on May 28, 2010, 08:49:46 PM
Interesting article on stems:

http://beartoothbullets.com/tips/archive_tips.htm/89


+1.  J-B Weld makes for a more durable modification than standard epoxy.
Logged


"I don't think we're in Kansas any more, Toto!"  Dorothy, in 'The Wizard of Oz.'

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: RCBS seating steams
« Reply #13 on: May 30, 2010, 03:02:39 AM »
When I use the hollow points I expand (bell) the case so it just fits into the seater die so as not to put so much pressure onto the tip and it works out good.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: RCBS seating steams
« Reply #14 on: June 01, 2010, 06:08:34 AM »
On many the bell trick works on soft bullets with certian profiles it dosent.
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »