« previous next »
Pages: [1]   Go Down

Author Topic: Barrel band sling swivel?  (Read 2121 times)

0 Members and 1 Guest are viewing this topic.

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Barrel band sling swivel?
« on: June 03, 2010, 06:32:04 AM »
Does anyone know if there is a barrel band sling swivel that will fit a .45 colt classic carbine that does not require soldering? I don't want to drill the forend.If one has to be soldered to the barrel can it be done without ruining the bluing on the barrel.
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: Barrel band sling swivel?
« Reply #1 on: June 03, 2010, 06:43:09 AM »
Use a regular solder-type band and stick it on with J-B Weld; wipe off the excess. It'll stay there forever.

Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #2 on: June 03, 2010, 07:27:45 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #3 on: June 03, 2010, 07:43:27 AM »
IIRC Uncle Mikes makes them that are 2 pieces and are held on by a screw. I have a couple on lever guns and they have held up great for many years and many miles through the thick Maine woods.  have been meaning to get a couple for my Handi's. Just check the diameter of the barrel where you want to attach the sling stud and order the appropriate unit. You may have to get one for a .410 or 20 gauge shotgun but they are all the same except for the diameter. I want to get a couple for my shotguns as well, especially a 12 gauge I have....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #4 on: June 03, 2010, 08:29:53 AM »
I have one of the Uncle Mike's clamp on swivels on my 20ga TDC turkey gun, I had to modify it to fit the contour of the barrel, but once I changed to a longer screw and made the modifications, it works fine, not as purdy as the solid type, but functional.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #5 on: June 03, 2010, 09:34:02 AM »
thanks guys never thought about just gluing it on! duh! If I had a mill at my disposal I would just machine a clamp on one.
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #6 on: June 03, 2010, 11:01:16 AM »
I have the U-Mikes 2pc and it fits up on a couple of my barrels pretty well. They come in some different sizes and you cant fault the 'easy to mount part' and a little more of a classic look up there rather than in the wood. The price is way better than machine time.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #7 on: June 03, 2010, 11:10:14 AM »
Yes, I think the look pretty good and they work great. I have one on my old Marllin 336 in .35 Remington and on my sons Marlin 336 in 30-30. They look nice, work great, have been on over 20 years each and have never let us down.....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #8 on: June 03, 2010, 12:11:51 PM »
Gcrank1 I used to be a machinist and would enjoy making one, but don't have the machinery required. ;)
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #9 on: June 03, 2010, 02:21:32 PM »
Maybe go down and talk to the 'local' voc-tech school shop instructor, he might be a good guy to get to know. Or even sign up for the class (those here are cheap). Even though you wouldnt need the 'class' it buys you cheap machine use. With a list of projects and your own prints you could do a lot for little outlay.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline kingstrider

  • Trade Count: (6)
  • Member
  • *
  • Posts: 66
Re: Barrel band sling swivel?
« Reply #10 on: June 06, 2010, 01:14:28 PM »
I ordered one from Ruger for a stainless No.1 which I'm converting from a Standard to a Sporter style.  Total cost was a little over $20 but you could probably find a blued one for cheaper from Brownells etc.  Looks cleaner than the 2-piece clamp on versions and appears to be tapered to match the barrel.  
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Barrel band sling swivel?
« Reply #11 on: June 06, 2010, 04:30:42 PM »
That looks like a dandy option! Can you give us an I.D. on both sides and/or what dia. barrel it needs to fit decent. I think I would use the H.D. Locktite for that.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline kingstrider

  • Trade Count: (6)
  • Member
  • *
  • Posts: 66
Re: Barrel band sling swivel?
« Reply #12 on: June 06, 2010, 04:49:19 PM »
Looks like .751" on one side and .754" on the other.  This is going on a .308 with the regular tapered barrel.  
Logged
Pages: [1]   Go Up
« previous next »