« previous next »
Pages: [1]   Go Down

Author Topic: Militec Grease fantastic for breech plugs and 777  (Read 761 times)

0 Members and 1 Guest are viewing this topic.

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs and 777
« on: November 19, 2003, 01:06:53 PM »
I have tried the teflon tape and the gorilla anti sieze grease when using 777 with my NEF Huntsman both sucked and would sieze up after shooting a few shots using 777. After 10 to 20 shots at the range I would have to tap the breech plug wrench handle with something to break the breech plug lose. I mean Tap like in some good raps on the handle to break things loose. I was sent a sample of the Militec grease and 0il. I thought what the heck the next time I shoot I will try the Militec grease instead on the anti seize grease. WELL WAS I SUPPRISED!!!! The breech plug turned out with no pressure at all just like it had been cleaned and greased with out shooting it. I had shot 20 shots at the range today and the breech plug cane out slicker than snot on a hoe handle.  This is great stuff folks I highly reccomend it for breech plugs on black powder guns expecially shooting 777. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline doninva

  • Trade Count: (35)
  • Contributor
  • ***
  • Posts: 412
  • Gender: Male
Militec Grease fantastic for breech plugs a
« Reply #1 on: November 19, 2003, 03:16:58 PM »
Jim, where do you get this grease. I need some. Don
Logged

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #2 on: November 19, 2003, 04:33:50 PM »
Sorry should have posted this earlier. it is at www.militec-1.com They have a spot on the web site where you can ask for a free sample. SO you can try it with out buying a 14 oz tube. Ask for the oil and the grease. Stuff works great. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #3 on: November 20, 2003, 06:43:41 PM »
Got a email back from them they liked my suggestion that it is good for black powder guns and will explore that market. It sounds like they are going to package it in more convenient form for this instead of the grease gun tube it comes in now. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline Jagdzeit

  • Trade Count: (0)
  • Member
  • *
  • Posts: 96
Militec Grease fantastic for breech plugs a
« Reply #4 on: November 21, 2003, 02:00:37 AM »
Jim,
 Funny thing that you just happen to post this information. While looking at the different news sites I came across the following story.
http://abclocal.go.com/wabc/news/investigators/wabc_investigators_111803gunlube.html

Seems that the gubbermint is killing of our soldiers (still) because they are to damn cheap to switch over from CLP to Militech's products.

Stay Safe,
Franz
Logged
Oppose the 2nd Amendment, you're an enemy of the Bill of Rights.
Enemy of the Bill of Rights, you 're an enemy of the Constitution.
Enemy of the Constitution, you're an enemy of The People.
Enemy of The People, you're an enemy of mine.  :blaster:

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #5 on: November 21, 2003, 04:51:46 AM »
Yea I have seen that in the last day or so. It is a shame that the Gov can be so corrupt with their spending and what they spend on. This is just a other example. The stories of 50 dollar hammers and toilet seats have ticked me off for years. When you and I can buy the same for under 10 bucks. All these Gov contractors should be dropped and we should start over. Enough graft and greed. Jim  :evil:  :evil:  :evil:
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline TKO

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Militec Grease fantastic for breech plugs a
« Reply #6 on: November 25, 2003, 02:38:12 AM »
I tried Militec the other day and found it to be coming out between the breech plug and the barrel after a few shots.  When I got home I had really had to hammer the plug wrench with a rubber mallet to get it to turn.

I reapplied the Militec, but this time I put a little between the face of the breech plug and the face of the barrel and not just on the threads.  Maybe this will make the difference.
Logged
"There are times when it is entirely appropriate to kill a fly with a sledge hammer".

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #7 on: November 25, 2003, 05:04:31 AM »
TKO, Thats what I do I found out if I cover every thing it comes out a lot better. I bet you just did not have enough on. I use a good coating. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline luredaddy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
Militec Grease fantastic for breech plugs a
« Reply #8 on: November 25, 2003, 02:18:37 PM »
Shot my custom barreled  Contender 45x209 today, used Militec, breech plug is frozen.  Will work on it tomorrow, only 10 shots.  The VAN HORN barrel is great, I will just have to figure this problem out.  I really donot see too much harm , if it stays frozen.
Logged

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #9 on: November 25, 2003, 02:21:43 PM »
Make sure you put grease on all bearing surfaces that is what I do and it does make a difference. Also make sure you use enough grease. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
Militec Grease fantastic for breech plugs a
« Reply #10 on: November 25, 2003, 03:51:37 PM »
After reading about the mil-tec I ordered a sample. it arived at my house with in 48 hours after i sent the email. and thought damn that was very fast. Then I looked at the return address and found out they where only 10 miles from me at the most.
Logged

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Militec Grease fantastic for breech plugs a
« Reply #11 on: November 25, 2003, 03:56:23 PM »
They are fast though they must have one employee just on top of this as I have heard of others getting the samples in 2 to 3 days also. Like I said before the biggest thing is to coat all surfaces that mate metal to metal with a thin coat and put enough on the threads also. I worked good for me that is all I can say. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline doninva

  • Trade Count: (35)
  • Contributor
  • ***
  • Posts: 412
  • Gender: Male
Militec Grease fantastic for breech plugs a
« Reply #12 on: November 26, 2003, 01:29:02 PM »
Thanks Jim, they got mine to me in about 4 days. I am going to try it in a couple of days. Don
Logged
Pages: [1]   Go Up
« previous next »