Author Topic: New to me 58  (Read 759 times)

0 Members and 1 Guest are viewing this topic.

Offline whitetailmaniac

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 175
  • Gender: Male
  • Chris, Texas
New to me 58
« on: July 06, 2010, 03:27:20 PM »
Just got a beautiful 58cal huntsman from Casca1. I think Im in love ;D Im thinking about 80 gr of 777 behind a prb for a starting load. What are you 58 fellers shooting out of yours.

     Chris

Offline topper88

  • Trade Count: (5)
  • Member
  • *
  • Posts: 65
Re: New to me 58
« Reply #1 on: July 06, 2010, 04:42:37 PM »
They are beautiful.  I had mine out about two months ago. Shot a three leaf clover with 70 grains of Tripple Se7en at 50 yds. with .57 PRB, .15 lubed patch & a rest.  I just cleaned it & packed it up for another year.  I did try some 200 grain cast bullets in a sabot as I try to experiment a little every year.  Failure, only one of three hit the target. In that particular rifle nothing works as great as a PRB.  On my .45 a 140 gr. cast bullet in a sabot work better than PRB. You will get much enjoyment and have a lot of fun to boot shooting it. Good luck with it.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: New to me 58
« Reply #2 on: July 06, 2010, 06:44:22 PM »
I use a patched round ball and 50 Decigrammes of Pyrodex.  I am not too sure what a Decigrammes is, it is marked on a French adjustable brass measure I got in an antique store in France when I worked there for a while.  I figured it must be close.  It is adjustable from 45 to 55 of those things, so I picked the middle one and it shoots really well.  I would say it is close to the volume of two round balls.  Larry
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline whitetailmaniac

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 175
  • Gender: Male
  • Chris, Texas
Re: New to me 58
« Reply #3 on: July 07, 2010, 02:02:44 PM »
Thanks guys. I think I will start at 70 and work my way up. What would a max charge be in this rifle?

     Chris

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • Moderator
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: New to me 58
« Reply #4 on: July 08, 2010, 08:38:41 AM »
I shoot Buffalo Ball-ets out of mine .Have used as much as 90gn of Shockeys Gold. But 75 -80 gn is more than enough with the 380 and 405gn Ball-ets. I don't shoot many patched balls mostly just full bore bullets. I just feel it gives me a little more consistancy eliminating the patch step. Kurt
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline whitetailmaniac

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 175
  • Gender: Male
  • Chris, Texas
Re: New to me 58
« Reply #5 on: July 08, 2010, 04:32:29 PM »
Thanks for the tip Kurt I may try some of those.

     Chris

Offline Macbeau

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Re: New to me 58
« Reply #6 on: July 09, 2010, 02:30:37 PM »
Just got a beautiful 58cal huntsman from Casca1. I think Im in love ;D Im thinking about 80 gr of 777 behind a prb for a starting load. What are you 58 fellers shooting out of yours.

     Chris
Your starting load should begin equivelant to your bore diameter (ie: 58 grains of 2fg or 3fg blackpowder) and go up OR down from there.  60 grains of 3fg with a 400gn +/- minie is more than enough to go through both sides of a deer at 150 yds.  PRB is great if you like shooting the lightest possible projectile for .58 (about 265gns).  A .58 with a 1:48 to 1:72 twist loves pure-lead, lubed, minies between 315gn (+/- 40gn og FFFg) to 600gn (+/- 75gn FFFg) - adjust accordingly for substitutes.  Your Huntsman is 1-66 and will shoot all minies fine.  Max charge for the .58 Huntsman's are 100gn's of FFg or FFFg blackpowder. 

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: New to me 58
« Reply #7 on: July 12, 2010, 04:20:13 AM »
1 decigramme = 0.1 gram = 1.54 grains.

So 50 decigramme = 77 grains

RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.