« previous next »
Pages: [1]   Go Down

Author Topic: Mauser problem  (Read 320 times)

0 Members and 1 Guest are viewing this topic.

Offline srussell

  • GBO Supporter
  • Trade Count: (14)
  • A Real Regular
  • *****
  • Posts: 838
Mauser problem
« on: June 07, 2010, 03:21:15 PM »
 never had this problem befor resized some 8x57mm brass once fired out of my mauser now the bolt closes hard. loading cast bullets but thats not the problem unloaded brass does the same thing. THINKS BILL
Logged

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Mauser problem
« Reply #1 on: June 07, 2010, 03:58:51 PM »
You probably need to screw you size die down just a touch to bump the shoulder back a little. Or you need to trim your cases. They may be too long and are causing the problem.
Logged

Offline AWD265

  • GBO Supporter
  • Trade Count: (16)
  • Avid Poster
  • *****
  • Posts: 111
Re: Mauser problem
« Reply #2 on: July 05, 2010, 02:02:49 PM »
I had that problem - check your case length.
Logged
There's nothing wrong with anyone that a good dose of Salvation won't fix.

Praise the Lord and pass the ammunition.

For the Christian there is no bad news - it's all Good News.

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: Mauser problem
« Reply #3 on: July 05, 2010, 03:25:21 PM »
shot1 ++ ;D
Logged
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline KansasPaul

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 205
  • Gender: Male
Re: Mauser problem
« Reply #4 on: July 05, 2010, 05:05:42 PM »
shot1+++  I would check the adjustment of your die and run the cases through it again.

Paul
Logged
Pages: [1]   Go Up
« previous next »