« previous next »
Pages: [1]   Go Down

Author Topic: breech plug grease  (Read 1374 times)

0 Members and 2 Guests are viewing this topic.

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
breech plug grease
« on: June 16, 2010, 03:41:12 PM »
OK guys, I'm new to this inline stuff. Been shooting sidelocks for years, but recently decided to try playing with a Remington 700ML. My question is, what is the best thing to use on the breech plug threads to keep them from seizing up? Thanks!
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: breech plug grease
« Reply #1 on: June 16, 2010, 03:55:50 PM »
Teflon tape.
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline kctibs

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 244
  • Gender: Male
Re: breech plug grease
« Reply #2 on: June 16, 2010, 05:32:13 PM »
I use a small amount of silver anti seize. Not sure if it is right or wrong but it works never had any problems.
Logged
"Where liberty dwells, there is my country."
-- Benjamin Franklin

Offline grouse

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 400
Re: breech plug grease
« Reply #3 on: June 17, 2010, 03:42:01 AM »
Logged

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: breech plug grease
« Reply #4 on: June 18, 2010, 01:48:34 AM »
 I've used a little of everything, Gorilla grease, teflon tape, & some of the BP/choke tube greases. I think the main thing is to use SOMETHING, don't over-tighten the plug, & REMOVE it regularly for cleaning/ re-lube.
Logged
NRA, Veteran

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: breech plug grease
« Reply #5 on: June 18, 2010, 03:13:45 AM »
Quote from: kctibs on June 16, 2010, 05:32:13 PM
I use a small amount of silver anti seize. Not sure if it is right or wrong but it works never had any problems.

This is what I use in my Savage in line. Perfect results. Designed for hot engine parts like spark plugs.

Cheese
Logged
Nothing in the world is more dangerous than sincere ignorance.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: breech plug grease
« Reply #6 on: June 18, 2010, 06:40:06 AM »
+3 on the tape, you'll never have a problem removing a plug after the tape has been used properly, keep the fouling out of the threads and the plug is as easy to remove as it was to install.  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,39309.msg223146.html#msg223146
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 1marty

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 751
Re: breech plug grease
« Reply #7 on: June 18, 2010, 04:45:42 PM »
same grease I use on my shot gun chokes. You should remove them after a days shooting and clean and put on a new coat of choke grease. Don't over tighten
Logged

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: breech plug grease
« Reply #8 on: June 18, 2010, 07:52:03 PM »
Buy a tube of silver anti seize for 3 bucks, it will last a life time.

Use it on your spark plugs too.


Cheese
Logged
Nothing in the world is more dangerous than sincere ignorance.

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: breech plug grease
« Reply #9 on: June 19, 2010, 04:27:39 AM »
Thanks guys! I had resisted the inline thing for a long time but am having fun playing with them now.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: breech plug grease
« Reply #10 on: June 20, 2010, 03:04:12 PM »
Quote from: Cheesehead on June 18, 2010, 03:13:45 AM
Quote from: kctibs on June 16, 2010, 05:32:13 PM
I use a small amount of silver anti seize. Not sure if it is right or wrong but it works never had any problems.

This is what I use in my Savage in line. Perfect results. Designed for hot engine parts like spark plugs.
              i use this in my encore too
Cheese
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Re: breech plug grease
« Reply #11 on: June 21, 2010, 12:22:36 PM »
white lithium grease
Logged

Offline Dang

  • Trade Count: (1)
  • Member
  • *
  • Posts: 44
    • Profishingstore.net
Re: breech plug grease
« Reply #12 on: June 22, 2010, 05:45:24 PM »
+ 4 On the teflon tape. Goes where you want it and stays where you put it.
Logged
"Badges? We ain't got no badges. We don't need no badges. I don't have to show you any stinking badges!"

Offline bulldog44

  • Trade Count: (1)
  • Posts: 3
Re: breech plug grease
« Reply #13 on: June 24, 2010, 12:42:09 PM »
Slick 50 grease
Logged

Offline saltysenior

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: breech plug grease
« Reply #14 on: July 30, 2010, 12:31:17 PM »

 found an old dust covered tube of KY jelly in the draw....not only does it work on the breech plug,it also got me more than a 150 fps increase when i swabbed the barrel with it ... ;D
Logged

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: breech plug grease
« Reply #15 on: July 30, 2010, 03:47:37 PM »
ya that stuff werks wonders on my "barrel" too! wonder if it would work on a c&b revolver lol
Logged
Pages: [1]   Go Up
« previous next »