« previous next »
Pages: [1]   Go Down

Author Topic: Lam or wood stock for Stevens 200?  (Read 1893 times)

0 Members and 1 Guest are viewing this topic.

Offline JimG

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 419
Lam or wood stock for Stevens 200?
« on: August 16, 2010, 02:57:40 AM »
Own a .308Win Stevens 200. I believe it is the newer model that Savage/Steven made some changes to magazine. Is there ANY laminated or solid wood stock that will fit this rifle? Thanks in advance.
Logged

Offline JimG

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 419
Re: Lam or wood stock for Stevens 200?
« Reply #1 on: August 16, 2010, 03:00:59 AM »
I should also add that the wood/lam stock MUST be pillar bedded just like the factory tupperware stock.
Logged

Offline Huffmanite

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 365
Re: Lam or wood stock for Stevens 200?
« Reply #2 on: August 16, 2010, 09:39:05 AM »
Yes, replacement stocks are available.  Your Stevens 200 in 308 is a short action, so same as a Savage 10.  Not sure about the pillar bedding.   Here is Boyd Gunstock info on SavageStevens

http://www.boydsgunstocks.com/Classic-Replacement-Stocks-Savage-Stevens-s/35.htm
Logged

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
Re: Lam or wood stock for Stevens 200?
« Reply #3 on: August 16, 2010, 02:58:45 PM »
I have a Bell & Carlson Tacticle / Varmet for the 3rd generation Stevens 200 that I am very pleased with.  It is composet with an aluminum

bedding block.  All you have to do is set the barreled action in & the action screws are @ torque a 1/4 turn after bottoming ! "sweet"

I also have a Boyds "Ross" Thumbhole that fits me great that I got from Stockeys, but the pillars have to be installed after you get the

stock.  Stockeys & other supliers can provide the pilars & they are not hard to install. good luck - Jim
Logged
Jim
Pages: [1]   Go Up
« previous next »