« previous next »
Pages: [1]   Go Down

Author Topic: 45-70 load with 325 grain flex tips  (Read 1666 times)

0 Members and 1 Guest are viewing this topic.

Offline coon-hunter1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
  • Gender: Male
45-70 load with 325 grain flex tips
« on: July 27, 2010, 04:16:42 AM »
I am going elk hunting in Wyoming this fall and am looking for a good load for my 45-70 Guide gun using Hornady flex tips.  Anyone have a good load they would like to share???
Logged

Offline JW307

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #1 on: July 27, 2010, 05:50:08 AM »
Here is a link to Hornady's reload data for the FTX bullets.  I load mine up to factory velocity with H4198 for my guide gun.  Hope this helps.  By the way what tag did you draw?  I live in WY and might know your area.
http://www.hornady.com/support/downloads/load-data
Logged

Offline coon-hunter1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #2 on: July 27, 2010, 07:32:45 AM »
Thank you!! My son, brother in law and I are hunting the Laramie peak area.  My son got a 800# cow there last year.
Logged

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #3 on: July 27, 2010, 08:20:04 AM »
I believe you will need to use the shorter LE Hornady brass.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Ten Ring

  • GBO Supporter
  • Trade Count: (18)
  • Contributor
  • *****
  • Posts: 297
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #4 on: July 27, 2010, 08:49:53 AM »
Has anyone worked up a load with std. brass?
 Jim
Logged
223,22-250,280,270,357m,2-35 whelen,2-444 marlin,3-45/70,45LC,45/70BC.,500SW,35rem,300aac,44mag

Offline Dill45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 122
Re: 45-70 load with 325 grain flex tips
« Reply #5 on: July 29, 2010, 11:38:41 AM »
I've worked up a load using standard Winchester brass using IMR 4064.  It's a pretty modest load, but groups extremely well.  Problem is for any lever actions you have to use it single shot style because of the COAL.
Logged

Offline gary0529

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Re: 45-70 load with 325 grain flex tips
« Reply #6 on: July 30, 2010, 03:51:12 AM »
Anyone have the case length of Hornady 45-70 brass for the flex tip?

God forbid I should have to actually buy a box of shells to get the cases and none of the local shops have any in stock for me to open and mic a case.

Hoping to be able to trim down a Starline case I have in abundance and try out the flex tip.

Thanks in advance.

Gary
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: 45-70 load with 325 grain flex tips
« Reply #7 on: July 30, 2010, 02:39:19 PM »
I had great luck using the FTX, Starline cases, CCI LR primers and between 34.3 and 52 grains of Reloader7 from Hornady's load notes.  I also shot some with BP substitute, but didn't get as good of accuracy, although the one I used didn't ever perform well and I've switched from Shockey's extra Gold to 777.  Have some loaded but haven't tested yet.  8)  In my .45-70 Buffalo Classic, the most accurate with the FTX and the Interlock hp's was around 46.3 grains.  Not too bad on recoil, although it is definitely there.  I also download some for my wife at 34.3 grains which kicks very light and I've had no issues with FTF.  Good luck. ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #8 on: July 30, 2010, 02:45:40 PM »
I believe you'd be way better off with the Remington 405 grain bullet.  The Hornady bullets offer nothing and performance is erattic at best.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: 45-70 load with 325 grain flex tips
« Reply #9 on: July 30, 2010, 02:50:48 PM »
Quote from: Swampman on July 30, 2010, 02:45:40 PM
I believe you'd be way better off with the Remington 405 grain bullet.  The Hornady bullets offer nothing and performance is erattic at best.

I haven't found them to be erratic thus far.  The only Hornady bullet I've gotten some anomalies with were the 250gr. XTP standard rounds.  Had a few de-jacket, but I was probably pushing them too fast. ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline teddybaham

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 114
  • Gender: Male
Re: 45-70 load with 325 grain flex tips
« Reply #10 on: August 04, 2010, 09:13:35 PM »
shooting sub moa with factory 325 flextips good luck!!!
Logged
what part of "shall not be infringed" dont you understand???
Pages: [1]   Go Up
« previous next »