« previous next »
Pages: [1]   Go Down

Author Topic: Name that bullet  (Read 582 times)

0 Members and 1 Guest are viewing this topic.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Name that bullet
« on: August 29, 2010, 05:53:04 PM »
I got 25-30 of these bullets in a trade recently and the trader told me that's all he had. They measure .452" and weigh ~400gr. They shoot exceptionally well out of my 45LC Handi with 4.5gr of TB powder. Velocity is low 700s. Now....can someone name that bullet? I only have 5 left and I really would like to get some more.

bullets:




groups: 1st shot flyer from clean barrel, next 3 same hole at 35yds



Thanks, Dinny

Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Name that bullet
« Reply #1 on: August 29, 2010, 06:51:33 PM »
Hmm only one I've seen with thin grease grooves like that are the Remington.  I didn't see that grain weight, but it looks like it's a product they've stopped production on, or at least it isn't listed at their site.  Maybe someone else can be sure.  8)  One below is for the 250gr.:

http://www.midwayusa.com/viewProduct/?productNumber=1601446981
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Name that bullet
« Reply #2 on: August 30, 2010, 04:30:42 AM »
 I have looked at the Lee, Lyman, RCBS, Saeco and Hoch mold charts. From all the mold charts that I have the only thing that comes close to looking like this bullet is the Lee #457-405-F . It is made for the 45-70. The reason that the grease grooves look so small is I would bet that they ran this .457 diameter bullet through a .452 size die and it shaved or squished the bullet down and made the grooves shallow and small.
Logged

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Name that bullet
« Reply #3 on: August 30, 2010, 08:31:05 AM »
Quote from: shot1 on August 30, 2010, 04:30:42 AM
I have looked at the Lee, Lyman, RCBS, Saeco and Hoch mold charts. From all the mold charts that I have the only thing that comes close to looking like this bullet is the Lee #457-405-F . It is made for the 45-70. The reason that the grease grooves look so small is I would bet that they ran this .457 diameter bullet through a .452 size die and it shaved or squished the bullet down and made the grooves shallow and small.

I have plently of .458" bullets in that weight range, anyone wanna try resizing them for me? ;D

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Re: Name that bullet
« Reply #4 on: August 30, 2010, 11:17:43 AM »
Looked at bullet and saw resemblance to the Lee 405 gra, 0.457 mould, then saw shot1"s comment.  My vote is on the lee, as stated by shot1.
Logged

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Name that bullet
« Reply #5 on: August 30, 2010, 11:52:19 AM »
Cheapest way to do it yourself is to get a Lee Lube and size kit from Midway they are $15.49 . The die fits your reloading press and pushes the bullet nose first into the die. It comes with a 4 oz. bottle of tumble lube to lube the bullets with afterward.
Logged

Offline sk330lc

  • GBO Supporter
  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 1102
  • Gender: Male
Re: Name that bullet
« Reply #6 on: August 30, 2010, 02:08:32 PM »
LRFN   Lead round flat nose..?     ;)
Logged
Be True to What You Hunt!!!!!
SUPPORT THE GBO SERVER
http://www.gboreloaded.com/forums/index.php/topic,191112.0/topicseen.html

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Name that bullet
« Reply #7 on: August 30, 2010, 04:53:51 PM »
I have someone resizing some Lyman 405gr .458" bullets for me. We worked a trade and sometime next week I will have a small flat-rate box full for testing.  :)

Since I already have some of the same 405s he's gonna resize to .452", I thought I would compare the two. Here's a pic showing both bullets. The .452" is on the left and .458" on the right. That looks like a good match to me.  ;)  I notice that the .452" bullet is longer. Is that from the resizing or should I suspect they are two very different bullets?



Thanks for the recommendations, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Name that bullet
« Reply #8 on: August 30, 2010, 05:59:09 PM »
I don't shoot lead much anymore so I am not up on all the molds that are out there but I think that these maybe two different bullets.
Look at the driving bands.
While the bottom band looks to be the same width, the rest of the bands on the bullet on the left are much wider.
One could say that they were shaved during resizing which makes sence if they have tapered greese grooves.
If that is true, then why isn't the bottom band also wider?
Unless it is smaller than the rest of the bands on the bullet on the right to begin with.
Just my observations.



LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Name that bullet
« Reply #9 on: August 30, 2010, 06:16:22 PM »
Quote from: LONGTOM on August 30, 2010, 05:59:09 PM
I don't shoot lead much anymore so I am not up on all the molds that are out there but I think that these maybe two different bullets.
Look at the driving bands.
While the bottom band looks to be the same width, the rest of the bands on the bullet on the left are much wider.
One could say that they were shaved during resizing which makes sence if they have tapered greese grooves.
If that is true, then why isn't the bottom band also wider?
Unless it is smaller than the rest of the bands on the bullet on the right to begin with.
Just my observations.
LONGTOM

All good points you bring up. I don't know enough about them either. I guess shooting some of the newly sized 405s will tell me everything I need to know.

Thanks, Dinny

Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine
Pages: [1]   Go Up
« previous next »