Author Topic: Point me to the "Ladder Method" of load development.  (Read 562 times)

0 Members and 1 Guest are viewing this topic.

Online Land_Owner

  • Global Moderator
  • Moderators
  • Trade Count: (31)
  • Senior Member
  • *****
  • Posts: 4543
    • Permission Granted - Land Owner
Point me to the "Ladder Method" of load development.
« on: September 20, 2010, 10:18:25 AM »
I know it has been discussed on GBO somewhere.  Link me to it please.

I am going back to load/accuracy development on my Handi-357 Mag with replacement bull barrel.  It is time to wring the accuracy out of that combination without "breaking the bank" (like last time)...even though I had a real good time shooting it with an inaccurate combination of bullet/powder/barrel.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline yukondog

  • GBO Supporter
  • Trade Count: (43)
  • Senior Member
  • *****
  • Posts: 1095
Re: Point me to the "Ladder Method" of load development.
« Reply #2 on: September 20, 2010, 12:32:21 PM »
Thanks for posting them Tim, they were good to read.
an unloaded wepon is equal to the same mass and volume as a rock.

Online Land_Owner

  • Global Moderator
  • Moderators
  • Trade Count: (31)
  • Senior Member
  • *****
  • Posts: 4543
    • Permission Granted - Land Owner
Re: Point me to the "Ladder Method" of load development.
« Reply #3 on: September 20, 2010, 12:35:49 PM »
Some days there isn't enough time to Search for all of the personal stuff when they actually want me to do stuff at the office for which I get paid.  Go Figure.

thank you Tim.  almost forgot, what's your fee again?

Offline moorepower

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 518
Re: Point me to the "Ladder Method" of load development.
« Reply #4 on: September 20, 2010, 01:11:03 PM »
Very good info.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Point me to the "Ladder Method" of load development.
« Reply #5 on: September 20, 2010, 01:39:07 PM »
Glad to help guys, no charge L_O, GBO moderator pay covers it!!  ;D

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Online Land_Owner

  • Global Moderator
  • Moderators
  • Trade Count: (31)
  • Senior Member
  • *****
  • Posts: 4543
    • Permission Granted - Land Owner
Re: Point me to the "Ladder Method" of load development.
« Reply #6 on: September 20, 2010, 02:14:00 PM »
Tim,

You coulda/shoulda hit me up for a GBO Server fund donation...again (hehe).

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Point me to the "Ladder Method" of load development.
« Reply #7 on: September 20, 2010, 03:30:04 PM »
The invitation to donate is always open!!  ;D

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: Point me to the "Ladder Method" of load development.
« Reply #8 on: September 22, 2010, 05:54:57 PM »
 I have seen two guns damaged due to the owners using the Audette Ladder method. I DO NOT blame the method!! Those guys were trying to save money and time and maybe components. They did NOT stop at obvious pressure signals like hard bolt lift or flattened primers. Preferring to run ALL the loads thru the gun instead. ALWAYS pay attention to pressure signs.A nice Browning or model 70 shoudn't be damaged to save money. Both of these guys had loaded 20 rounds in small powder increments. The 17th round of one string was difficult to eject and the shooter continued to fire the others. Resulting in a damaged bolt and ejector in the Browning 30-06. The other gun was a 7mag of foreign manufacture. The bolt was bent and the barrel burst on about the 16 th shot.