« previous next »
Pages: [1]   Go Down

Author Topic: Guns I would like to see made.  (Read 1861 times)

0 Members and 2 Guests are viewing this topic.

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
Guns I would like to see made.
« on: September 23, 2010, 04:03:57 AM »
I'm a big fan of guns that are versatile. Not suited for just one type of hunting or shooting scenario. I think the Savage 24-V line of rifle/shotgun combos did well in this but had room for some improvements. Also am a big fan of rifles that shoot the same round as the pistol you might be carrying. Blue guns are good but I'm a threat to buy stainless when available. I'd like to see a rifle/shotgun combo in a choice of 357 mag, 41 mag, 44 mag or 45 LC over a choice of 20 ga or 12 ga shotgun, 20 inch or so barrel, in a stainless or other weather resistant finish. Probably be a bit pricey but it would cover a lot of bases in terms of versatility. Any of you have gun ideas that you would like to see made real ?
Logged
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Guns I would like to see made.
« Reply #1 on: September 23, 2010, 04:43:13 AM »
You are correct that the Savage 24 line was/is a very good all around gun.
It can do many things.
I have 3 of them.
A 410ga/22lr old model--20ga/22lr--but I feel the best of them is the 3" 12ga/30-30.
It can be used to do all there is with the right ammo from small game to large to self defence.
A bit heavy as a survival gun but will get the job done and ammo can be found almost anywhere.



LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline subdjoe

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3036
  • Gender: Male
Re: Guns I would like to see made.
« Reply #2 on: September 23, 2010, 07:18:24 AM »
A Lemat Carbine. 
Logged
Your ob't & etc,
Joseph Lovell

Justice Robert H. Jackson - It is not the function of the government to keep the citizen from falling into error; it is the function of the citizen to keep the government from falling into error.

Offline myronman3

  • Moderator
  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4837
  • Gender: Male
Re: Guns I would like to see made.
« Reply #3 on: September 25, 2010, 06:17:02 AM »
5 shot gp100 in 41 magnum.
Logged

Offline 243dave

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 517
Re: Guns I would like to see made.
« Reply #4 on: September 25, 2010, 05:06:31 PM »
A 5 shot 454(or 45 colt with long cylinder) bisley blackhawk hunter with 6 inch barrel. 
Logged

Offline Dave in WV

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2162
Re: Guns I would like to see made.
« Reply #5 on: September 26, 2010, 05:34:30 AM »
Ruger Hawkeye RSI International carbines chambered for 7mm-08, 6.5x55, and 358 Win. Not stainless, blued.
Logged
Setting an example is not the main means of influencing others; it is the only means
--Albert Einstein

Offline Empty Quiver

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2847
Re: Guns I would like to see made.
« Reply #6 on: September 26, 2010, 06:38:14 AM »
1894 Marlin in 327mag, stainless with the grey laminate stock. Number 2 on my list would be a bullpup carbine in 10mm, suppressed, thank you.
Logged
**Concealed Carry...Because when seconds count help is only minutes away**

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
Re: Guns I would like to see made.
« Reply #7 on: September 28, 2010, 05:18:14 PM »
An affordable double or over and under rifle in some 7mm to 375 caliber.  Something new for $1,500 or less.  Maybe a set of barels on a 20ga O/U frame???
Logged
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline jamaldog87

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1465
  • Gender: Male
Re: Guns I would like to see made.
« Reply #8 on: October 04, 2010, 07:37:50 AM »
All the guns i would like to see made are class 3, SBR, or AOW.   But for hunting maybe a 1911 like gun  with 454 power,  a Gepard M2A2 anti-materiel rifle in 50BMG (it the only 50cal that can be hip-fired thanks to the advanced recoil mechanism) , the  OP-SKS rilfe, a lever gun in 500 S&W.
Logged
Most Interesting Man in the World: I Don’t Always Watch Shows for Little Girls, but when I Do, I prefer My Little pony . stay magic my friends

Offline BUGEYE

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 10268
  • Gender: Male
Re: Guns I would like to see made.
« Reply #9 on: October 04, 2010, 12:33:11 PM »
bring back the savage 24 with all the old configurations  WITH AN ACCUTRIGGER
they would sell millions.
Logged
Give me liberty, or give me death
                                     Patrick Henry

Give me liberty, or give me death
                                     bugeye

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Guns I would like to see made.
« Reply #10 on: October 04, 2010, 01:50:35 PM »
The Ruger #3 in .30-40 Krag and produced by Remington.

The Remington 700ML set up for smokeless.

The Savage 24 is too heavy and complicated IMO.  Other than that I love them.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3636
Re: Guns I would like to see made.
« Reply #11 on: October 04, 2010, 02:12:50 PM »
Quote from: BUGEYE on October 04, 2010, 12:33:11 PM
bring back the savage 24 with all the old configurations  WITH AN ACCUTRIGGER
they would sell millions.

  Millions?  I bet NOT even a fraction of that amount.  NOW, if they fix it's other problems, it would sure help to sell some.

  DM
Logged

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3636
Re: Guns I would like to see made.
« Reply #12 on: October 04, 2010, 02:15:15 PM »
Quote from: drdougrx on September 28, 2010, 05:18:14 PM
An affordable double or over and under rifle in some 7mm to 375 caliber.  Something new for $1,500 or less.  Maybe a set of barels on a 20ga O/U frame???

  Buy a Valmet 412, they sell for around that, and you can also get 12 and 20 ga bbls...

  DM
Logged

Offline BUGEYE

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 10268
  • Gender: Male
Re: Guns I would like to see made.
« Reply #13 on: October 05, 2010, 04:24:49 AM »
Quote from: Drilling Man on October 04, 2010, 02:12:50 PM
Quote from: BUGEYE on October 04, 2010, 12:33:11 PM
bring back the savage 24 with all the old configurations  WITH AN ACCUTRIGGER
they would sell millions.

  Millions?  I bet NOT even a fraction of that amount.  NOW, if they fix it's other problems, it would sure help to sell some.

  DM
I had a 30.30/20ga and the trigger was my only complaint.
Logged
Give me liberty, or give me death
                                     Patrick Henry

Give me liberty, or give me death
                                     bugeye

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18267
Re: Guns I would like to see made.
« Reply #14 on: October 10, 2010, 02:59:47 AM »
#1A ruger as a production chambered (not some overprice limited run) blued walnut in 250 sav,257 roberts and 308. and icying on the cake would be the same in the international #1s. The return of the original rem mountain rifles with a floor plate not a box mag in 257 and 280 and the return of the rem classic as a main line production gun. Id also like to see ruger return to the tang safey and quit spending money changing the look of there 77s and put that money into finally making a bolt gun thats accurate.  For handguns id love to see a ruger vaquero 4 5/8s blued 5 shot 480 at my house and maybe a run of accusports in 5 shot 480. Another one id jump on in a second would be the new small framed ruger in a 5 shot 44 mag. Smith could also make another run of 696s in the original stainless 3 inch configuration. I would even live with the stupid key lock.
Logged
blue lives matter

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Guns I would like to see made.
« Reply #15 on: October 10, 2010, 03:32:16 AM »
A 5 shot Single Six in .38 Special would be nice.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline jlwilliams

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1321
Re: Guns I would like to see made.
« Reply #16 on: October 10, 2010, 04:31:25 AM »
Bolt action carbines in pistol calibers to use as suppressor hosts.

I'd like to see some more afordable double rifles too.  The 45-70 Remington had a couple years ago was OK, but only OK and now it's no longer available.  Maybe a 22lr double barrel rifle would be neat too.
Logged

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: Guns I would like to see made.
« Reply #17 on: October 10, 2010, 04:43:33 AM »
357 double rifle with adjustable cross point so the range could be changed.  I bet no one else would make such a thing.

Matt
Logged
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck
Pages: [1]   Go Up
« previous next »