Author Topic: Sighting Help  (Read 375 times)

0 Members and 2 Guests are viewing this topic.

Offline Topper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Sighting Help
« on: November 20, 2010, 10:26:39 AM »
I lucked into Tracker I barrel (20 gauge) awhile back; locks up fine on an old Topper I had. Only I'm having a problem with sighting it.  Last week I had a chance to do some shooting - starting at 25 yards it grouped fine but even with the rear sight tightened all the down it still shoots 6+ inches low.  What about filing down the the front blade slightly?  Any ideas?

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: Sighting Help
« Reply #1 on: November 20, 2010, 10:46:42 AM »
 Adjust your rear sight up, this will make you raise the front sight to match. ;)

Lonny

Offline Topper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Re: Sighting Help
« Reply #2 on: November 20, 2010, 10:59:25 AM »
Am I thinking wrong, doesn't lowering the rear site raise the POI?  I let the screw out all the way.  The rear site is tensioned by a spring so that moved the rear up as far as it would go.  Didn't seem to move the point of impact a bit.  Tightening the screw all the way down didn't cause things to change either.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Sighting Help
« Reply #3 on: November 20, 2010, 11:34:46 AM »
You adjust the REAR sight in the direction you WANT the bullet to go. ie, want your point of impact up, raise the rear sight.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: Sighting Help
« Reply #4 on: November 21, 2010, 10:18:08 AM »
get it drilled & tapped for a scope rail
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga