« previous next »
Pages: [1]   Go Down

Author Topic: Holsters for Kahr's  (Read 2290 times)

0 Members and 1 Guest are viewing this topic.

Offline Old Fart

  • Intergalactic Moderator
  • GBO Supporter
  • Trade Count: (77)
  • Senior Member
  • *****
  • Posts: 3851
  • Gender: Male
Holsters for Kahr's
« on: April 23, 2010, 06:43:30 AM »
Can you guys point me in the right direction for a website that carries multiple holsters for different Kahr handguns?
Logged
"All my life I've had a bad case of the Fred's. Fredrick Vanderbilt taste on a Fred Sanford budget." CR
Lifetime/Endowment/Patron NRA Member.
Second Amendment Foundation, www.saf.org - Life Member

Offline Scibaer

  • Central Michigan, USA, Earth
  • Moderator
  • Trade Count: (25)
  • Senior Member
  • *****
  • Posts: 1686
  • FATE FAVORS THE WISE
Re: Holsters for Kahr's
« Reply #1 on: April 23, 2010, 08:17:51 AM »
i dont know of any specific website for Kahr holsters. if someone does come up with one i'll add it too the useful link.

but, i  have a cw40 for a my daily carry gun. i have two holsters that i use, depending on how i'm dressed for the day
i use an uncle mikes sidekick, size 16. its fits the gun great. and i have a desante's that holds the gun at an angle, strong side. it even has kahr stamped into the retaining strap. but i dont know what specific model it is .
 
i did find this article about holsters for Kahr handguns written by Mas Ayoob himself. http://www.kahr.com/PA-1B/review_cbh2005.html.
Logged

Offline tfranklin7

  • GBO Supporter
  • Trade Count: (163)
  • Contributor
  • *****
  • Posts: 408
  • Gender: Male
Re: Holsters for Kahr's
« Reply #2 on: April 24, 2010, 04:51:13 AM »
I use a Comp-Tac IWB for my P45 and its really comfortable if you like kydex holsters. TF
Logged
"A government big enough to give you everything you want, is big enough to take away everything you have." - Thomas Jefferson

Offline curteric

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 239
  • Gender: Male
Re: Holsters for Kahr's
« Reply #3 on: April 25, 2010, 03:09:46 AM »
This is where I have all my holsters made. I have several for my K40, my favorite is the Tuckable IWB. He does great job. He's getting busier as time goes on used to be about 3-4 weeks now 6-8.
 http://www.dmbullardleather.com
Logged

Offline Scibaer

  • Central Michigan, USA, Earth
  • Moderator
  • Trade Count: (25)
  • Senior Member
  • *****
  • Posts: 1686
  • FATE FAVORS THE WISE
Re: Holsters for Kahr's
« Reply #4 on: April 25, 2010, 03:25:32 AM »
those are some really nice looking holsters. the prices look really fair too.
those concealed carry holsters look way to nice for my cw 40 , though  ;)
the link is added to the sticky's list now. thanks for the link.
Logged

Offline JW307

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
  • Gender: Male
Re: Holsters for Kahr's
« Reply #5 on: April 26, 2010, 05:54:03 AM »
I've got an El Paso Saddlery "Street Combat" holster for my CW9 that's actually labeled "PK9" on the back, so I would imagine it would also fit the P and K series.  I also have an Uncle Mike's IWB holster that I like for concealment.
Logged

Offline helotaxi

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 375
Re: Holsters for Kahr's
« Reply #6 on: May 04, 2010, 04:43:28 AM »
I have a Bianchi for my CW9, and that was the only one I could find at the time.  I ended up ordering two others from Don Hume.  Plenty of companies make holsters for the 9/40 sized Kahrs, but only if you're right handed.  I'm not.  Special order is the way of things for me.  I still haven't found a decent left hand holster for my P45.
Logged

Offline Maryland Hunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 150
Re: Holsters for Kahr's
« Reply #7 on: June 30, 2010, 10:40:18 AM »
I have a Fobus C21-B for my Bersa .45 UC, and it's also listed as the model for the Kahr CW9/P9. I ordered a Crossbreed supertuck for my Bersa, right before I bought the Kahr, and was very pleased to find that it fit both the Bersa and the Kahr perfectly. My 1911 also fits it like a glve, and the fobus is called out for it as well. I am currently carrying the Kahr in the Supertuck, and am very pleased with it.

Hope this helps.

MH
Logged

Offline badbear

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: Holsters for Kahr's
« Reply #8 on: July 04, 2010, 02:33:29 PM »
Hi,
  Try a Triple K 314 series they are Inside Waist Band type. Cover the entire gun and all leather. I have carried a gu both on and off the job for over 30 years. Best combo I have found yet for concealment
BadBear
Logged

Offline handi270

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Re: Holsters for Kahr's
« Reply #9 on: July 10, 2010, 03:22:32 PM »
I have a Safariland holster for my CW40. It is a paddle type, is adjustable, and holds the pistol close in to the body.
It is easy to put on and take off, with a little practice.

This one -- 568-54 Custom Fit Holster.

Their site shows it for the PM9, but it works great on the CW40.

I bought it and the Kahr at Murphs Guns in Duncan, OK. Several of the guys in the store use it as their daily carry.
Logged

Offline curteric

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 239
  • Gender: Male
Re: Holsters for Kahr's
« Reply #10 on: December 29, 2010, 10:34:53 AM »
I'm looking for a new holster for another handgun. I went to my favorite maker David Bullard, www.dmbullardleather.com  and I find out that he is now backed up 16-20 weeks. I should never have posted here that he is good. I guess, I'll just have to wait, :( he's worth it!
Logged
Pages: [1]   Go Up
« previous next »