« previous next »
Pages: [1]   Go Down

Author Topic: Ga cannon/mortar folk.  (Read 835 times)

0 Members and 1 Guest are viewing this topic.

Offline mdawson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Ga cannon/mortar folk.
« on: December 31, 2010, 09:50:30 AM »
I need some insight and info to build a bowling ball mortar. Hit me up with some info if you have some.
Matt
Camilla GA.
Logged

Online GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #1 on: December 31, 2010, 10:20:42 AM »
Keep an eye on this thread.  What kind and size of machinery do you have available?
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline mdawson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Re: Ga cannon/mortar folk.
« Reply #2 on: December 31, 2010, 03:53:47 PM »
I don't have access to any machines. I can't find any kind of tank that will work. When I do find one that will the place wont even let me buy it. I told them they could cut it open so I couldn't refill it. No way they would do it.
Logged

Online GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #3 on: December 31, 2010, 04:13:37 PM »
From the Stickies:  "The Pressure tank need to make the expansion chamber for a bowling ball mortar for is the 300 CF, DOT 3AA2400 made by Taylor Wharton."

This is our recommendation for a bowling ball mortar tube.  When you go into the welding supply store, don't mention anything that would give them a clue that you want the cylinder for an artillery piece.  They don't want any liability if you blow yourself up so they won't sell you one if you tell them you are making a cannon or mortar from it.  You may have to buy a fill of gas to make them think you are buying it to weld with.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline Winger Ed.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 80
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #4 on: December 31, 2010, 08:27:43 PM »
You might ask to buy the top half of (a 300 cu.ft) one that has failed its periodic hydrostatic recertification/test.
If ya have to buy a new one- they're about $400.  When they fail hydrostat. testing- they're scrap metal.
Tell 'em you want it to make a gong or a bell.  That should ease thier liability fears.

Its a fairly common re-use for them.
I've built a couple in years past myself.
Ya weld a chain over the valve protector cap to hang it, and when whacked with a big hammer-
It sings a song you can hear for about a mile. 
Logged
"Gone are the days of wooden ships, and Iron men.
I doubt we shall ever see their likes again".
Unknown US Coast Guard Commander on the upper US East Coast.  Circa 1920

In our modern & enlightened times:
The only thing the Meek will inherit- is a Berqa.

Offline mdawson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Re: Ga cannon/mortar folk.
« Reply #5 on: January 01, 2011, 11:19:39 AM »
I will try the gong/bell story. Hopefully I will have better luck on Mon.
Logged

Online GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #6 on: January 01, 2011, 06:18:30 PM »
At least out here, a cylinder undergoes two tests, a visual one and a pressure one.  They can fail either.  Try to get one that failed the visual test.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline 1Southpaw

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 642
  • Gender: Male
  • Let Freedom ring
Here are some failures
« Reply #7 on: January 02, 2011, 05:20:03 AM »
Made in to a wonderful mellow wind chime.
Logged
Left Handed people are in their right mind .

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Ga cannon/mortar folk.
« Reply #8 on: January 02, 2011, 06:33:17 AM »
You have to hear the tone of that wind chime it is so  mellow...   
Logged

Offline mdawson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Re: Ga cannon/mortar folk.
« Reply #9 on: January 02, 2011, 07:41:28 AM »
Would you care to donate anything off of that wind chime that would further my endeavors of owning a bowling ball mortar?
Logged

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Ga cannon/mortar folk.
« Reply #10 on: January 02, 2011, 07:53:21 AM »
my guess is that none of them are the correct size   ;D
Logged
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Ga cannon/mortar folk.
« Reply #11 on: January 02, 2011, 08:03:20 AM »
Dan has it correct, that is why they are hanging as a wind chime.  There are better ways to build a bowling ball mortar than using a pressure tank.
Logged

Offline mdawson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Re: Ga cannon/mortar folk.
« Reply #12 on: January 02, 2011, 12:19:48 PM »
I am all ears or in this case all eyes. I am thinking that I will have to employ a machine shop in my endeavours. I lack a lathe or much of anything else I will need. So please guide me in the bowling ball mortar way.
Logged

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Ga cannon/mortar folk.
« Reply #13 on: January 02, 2011, 12:25:37 PM »
Reply #1 has a link to the start of my build.  This won't be a fast project since the steel currently is 1300 miles away. 
Logged

Online GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #14 on: January 02, 2011, 12:54:30 PM »
This won't be a fast project since the steel currently is 1300 miles away.

And he still needs another piece.   ;)
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline 1Southpaw

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 642
  • Gender: Male
  • Let Freedom ring
Re: Ga cannon/mortar folk.
« Reply #15 on: January 02, 2011, 01:22:40 PM »
But....DD's steel may have a ride home in the basement of my motor home  8)
Logged
Left Handed people are in their right mind .

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Ga cannon/mortar folk.
« Reply #16 on: January 02, 2011, 01:36:53 PM »
Quote from: 1Southpaw on January 02, 2011, 01:22:40 PM
But....DD's steel may have a ride home in the basement of my motor home  8)

Do you have any idea how you are going tie it down so it doesn't roll around when the wild woman drives!
Logged

Online GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Ga cannon/mortar folk.
« Reply #17 on: January 02, 2011, 04:33:57 PM »
I can always notch a scrap pallet and we can strap it to that and tie that down.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill
Pages: [1]   Go Up
« previous next »