Author Topic: Whats the difference in these Recievers?  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline JAM66

  • Trade Count: (24)
  • Avid Poster
  • **
  • Posts: 121
Whats the difference in these Recievers?
« on: January 09, 2011, 01:56:45 PM »
Whats the difference in these 2 recievers, The top one has an extra pin it and is made in Illion NY. The bottom has a nicer finish and a nice trigger pull of a tad under 3 lbs. Just wondering what the extra pin in the top one is..

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Whats the difference in these Recievers?
« Reply #1 on: January 09, 2011, 02:08:47 PM »
I think that is an inspection for plug on the top receiver so you can view the latch/latch shelf engagement.  I believe there is info in the FAQs on how to remove that plug.  The plugs have been installed by H&R for the last few years.

BB
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: Whats the difference in these Recievers?
« Reply #2 on: January 09, 2011, 02:16:47 PM »
 It is an enspection port as BB said. Trigger pull varies from one to the next. If you show a pict of the butt stock end we will be able to tell if they are SB2 or SB1. FAQ has a load of info and tips ;)


Lonny