« previous next »
Pages: [1]   Go Down

Author Topic: .445 SuperMag Reamer  (Read 1118 times)

0 Members and 1 Guest are viewing this topic.

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
.445 SuperMag Reamer
« on: January 05, 2011, 04:01:40 AM »
Well I've read thru bunches of old threads and most are older. My question is: Is there a .445 supermag reamer available for rent here.

I see listing for the 454 and the 357 max but can't nail down the .445 availablility. Thinking about taking the step.

Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #1 on: January 05, 2011, 05:40:54 AM »
There are .445 reamers for rent, but not from members here.  Tim'll be along to fill you in.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: .445 SuperMag Reamer
« Reply #2 on: January 05, 2011, 05:44:22 AM »
How much does a reamer cost to buy?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #3 on: January 05, 2011, 05:45:51 AM »
It's been asked before, none so far, 4D and Elk Ridge rent reamers tho. Brass is much harder to find, Starline is the only maker and they won't make any until they have back orders of 60k, they were only up to 20k a week or two ago.  :-\

A new reamer will cost about $100.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: .445 SuperMag Reamer
« Reply #4 on: January 05, 2011, 05:48:37 AM »
Thanks Tim, not very motivated to get one then :(
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #5 on: January 05, 2011, 07:51:50 AM »
A: You don't have to buy the reamer.  You  rent it.

B:  There is brass available.....not from Starline just now, but it can be found.  I loaded at least a hundred rounds the day after Christmas.

Personally, I love the round.  It's like a shorter .45-70.  While you're waiting to find the brass, you can still shoot .44 specials, .44 Russian and .44 magnums.  Also, it doesn't cost a heck of a lot more to reload for than the .357.

I'd go do it.......OH!!.......I remember now.......I did it ;D ;D

Seriously, it is a sweet Handi baby.

I can't recommend it highly enough.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: .445 SuperMag Reamer
« Reply #6 on: January 05, 2011, 08:23:44 AM »
Pete, Was thinking about one for the people on here. Don't know how many would do it if brass is a problem. Then thought of like if 5 guys wanted to ream then they could send an amount to Tim (as a donation?), he could buy it and they would be first on the list. Then future procedes would go to Graybeards. Don't know if that would work. I'd be interested  as I think I would like to try that cartridge. It's not a high priority right now as I probably won't shoot my 44 again till next Fall?? More time to find brass ;) Got a lot of other things that need loaded and shooted right now. I haven't been able to find loading data or carteidge dimensions in any of my old books. I think it was posted on here before. Also I think I read before that you can just use your 44 mag dies ???

This is probably why my "old" boss told me I wasn't supposed to think ;D

Should be loading now anyway ;)
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #7 on: January 05, 2011, 08:48:46 AM »
I believe that is close to the way the .357 max reamer got started as well as the .454. 

I and a lot of others here have load data for the .445.  Just shout and we'll get it to you.  It aint rocket science, and you don't need super high pressures or velocity.  I think mine are running an average of about 1580 fps.  And yes, I do use my .44 Mag dies.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: .445 SuperMag Reamer
« Reply #8 on: January 05, 2011, 01:48:43 PM »
Pete,

I'm thinkin' when you get your 444M that you'll be a lot less concerned about buyin' brass for that 444 Lite of yours. ;D

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: .445 SuperMag Reamer
« Reply #9 on: January 05, 2011, 02:55:53 PM »
I had 445 sm in mind but the brass scared me off. With brass available I would definitely be interested, how do we remedy the brass question? ear
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline steelworker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Re: .445 SuperMag Reamer
« Reply #10 on: January 05, 2011, 03:05:05 PM »
Is this safe to shoot on an SB1 frame?  Please go easy on me, 1st time poster
Logged
NRA--Lifetime

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #11 on: January 05, 2011, 03:52:37 PM »
Welcome steelworker!

Maybe, maybe not, there's no SAAMI standard for the 445SM, the 44mag SAAMI MAP is 36kpsi, max loads in the 445SM run 43kcup. It's best to use an SB2 frame, then there's no doubt it's safe.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: .445 SuperMag Reamer
« Reply #12 on: January 05, 2011, 04:26:38 PM »
 If someone decides to purchase one for the site. Put me in line and send me a note, I will get my donation coming. ;)

Lonny
Logged

Offline nova71

  • Trade Count: (60)
  • Contributor
  • ***
  • Posts: 494
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #13 on: January 05, 2011, 06:32:29 PM »
yep! me too  ;D I have an extra 44mag barrel I'm thinking about making into a shorty, it would be nice as a 445
Logged
It is better to take refuge in the Lord than to trust in man. Psalm 118:8 (center of the bible)

Handi-List
 204Ruger, 223Rem, 243Win, 30-30Win,450 Marlin, 44Mag, 357Max, 357Mag, 45-70, 20ga Partner, 20ga shorty.

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: .445 SuperMag Reamer
« Reply #14 on: January 06, 2011, 09:22:42 AM »
Well I decided to go ahead and jump in the water. Ordered (rental) the reamer from 4D a few minutes ago and should have it in a few days. Also placed a backorder with Midway for 100 brass whenever they get the backorders moving. So I should be ready to join the group of satisified .445SM users in a few days.

Thanks to all for the good info on this site. Hope it goes smooth.

Logged

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: .445 SuperMag Reamer
« Reply #15 on: January 10, 2011, 09:28:28 AM »
Reamer in todays mail.....Now ill phatgemi have the cajones to do the reaming????? Only concern is depth. Off work tomorrow and wednesday......Predicting I'll have a .445SM by then.......
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: .445 SuperMag Reamer
« Reply #16 on: January 10, 2011, 10:11:56 AM »
Handi factory chambers tend to have deep rim cuts so be careful not to go any deeper.  Reaming chambers is fun so have a good time.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .445 SuperMag Reamer
« Reply #17 on: January 10, 2011, 11:05:17 AM »
Go for it (if you haven't already done it!!), just go slow and watch that rim cut.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline geezer56

  • GBO Supporter
  • Trade Count: (102)
  • Contributor
  • *****
  • Posts: 446
Re: .445 SuperMag Reamer
« Reply #18 on: January 10, 2011, 02:13:05 PM »
And somebody could do like I did.  Pony up the bucks and buy a reamer.  Use it to do as many barrels as you have available, then contribute it to the site.  Lord knows we all gain from having this site available.  I've had more than a hundred bucks worth of questions answered here, some I questions I didn't even know I had til I read the answer!
Logged

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: .445 SuperMag Reamer
« Reply #19 on: January 12, 2011, 08:21:36 AM »
Well add another .445 to the greybeard inventory. Got it taken care of. Now awaiting some .445 brass so I can load up some test loads. Have a member on here graciously sending me a few. Also I'm on backorder along with everybody else at midway.



Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: .445 SuperMag Reamer
« Reply #20 on: January 12, 2011, 10:35:09 AM »
Now that you have reamed out a plinking caliber chamber it is time to ream a 45-120. ;D  Congrats and let us know how it shoots.

BB

Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.
Pages: [1]   Go Up
« previous next »