« previous next »
Pages: 1 [2]   Go Down

Author Topic: Two New Superlights in the Works  (Read 2117 times)

0 Members and 1 Guest are viewing this topic.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Two New Superlights in the Works
« Reply #30 on: January 19, 2011, 03:31:10 AM »
Octagon can be done with just V-blocks, clamps, shims for one end to establish the taper and the proper calculations and eyeball. After you get (probably) the top flat straight and square the V-blocks index the flat to make another, and 'round you go'.
Well, there is a bit more than that brief description, but that gives your mental juices something to start with; really not that bad to do.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline briannmilewis

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 1017
  • Gender: Male
Re: Two New Superlights in the Works
« Reply #31 on: January 19, 2011, 03:47:29 AM »
Tim, you poor, sick, deluded individual. My heart aches for you. Didn't the Handiholic therapy work?

(Great plans though!)
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Two New Superlights in the Works
« Reply #32 on: January 19, 2011, 05:12:36 AM »
 ;D ;D ;D ;D ;D
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Shu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1484
Re: Two New Superlights in the Works
« Reply #33 on: January 19, 2011, 08:12:50 AM »
Quick,
quit messing around and get one of them made into an octagon barrel and post pics. This lolly gagging about on this project is really getting under my skin. Don't forget the range report. ;D ;D
Logged

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: Two New Superlights in the Works
« Reply #34 on: January 19, 2011, 11:53:16 AM »
Tim,

I've been reflecting on the sheer quantity of Handi's you have, and it would seem you have already accumulated every possible caliber and combination.  Then again, you probably won't be satisfied until you do................ ;D

Your amazed friend,

Ben
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Two New Superlights in the Works
« Reply #35 on: January 19, 2011, 01:52:15 PM »
Well, can't help myself, haven't bought a new rifle for a couple years, but thanks Ben!  ;D

More disappointment, although I don't know how serious it is yet, won't know until I shoot it, the first few inches of bore ahead of the chamber looks like they had a problem with the broaches when they rifled it, the lands are dark right up where there's a visible defect around the entire bore, looks like a small step or ring, can't feel it, but I can see it. There are some bad spots in the bore past there also, rough lands and spots in the grooves as well, I ran a Flitzed patch as well as solvent and brush thru the bore several times, but it made no difference. So I won't be doing anything to it except mounting a scope to see if it shoots good.  :-X

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: 1 [2]   Go Up
« previous next »