« previous next »
Pages: [1]   Go Down

Author Topic: .357 Maximum Reamer  (Read 1895 times)

0 Members and 1 Guest are viewing this topic.

Offline steve@357maximum.com

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
.357 Maximum Reamer
« on: January 19, 2011, 11:08:41 AM »
I asked this question on the .357 Maximum Reamer list, but I thought this may be a better place to ask since many of you have used this reamer.

I understand this reamer is the correct rifle type.  Can anyone tell me how long the throat is with this reamer?  Specifically, what cartridge overall length is required to touch the lands with a Hornady 180gr. SSP or a Hornady 200 gr. FTX.

Thanks,

Steve
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #1 on: January 19, 2011, 11:33:50 AM »
FWIW, since you already have a rim cut you can do the chamber depth to whatever you want between stock and full Maxi.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: .357 Maximum Reamer
« Reply #2 on: January 19, 2011, 01:21:17 PM »
Steve,

I have only loaded the 180 HP/XTPs and to touch the lands is about 2.005". I stopped reaming a little short so as not to increase the rim cut on my barrel.  Lotta folks here shoot the bullets you mentioned so you should get an answer shortly as the 357 Maxi is held in very high esteem around here.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline steve@357maximum.com

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #3 on: January 19, 2011, 01:52:58 PM »
BB,
Although I  don't shoot the XTP's, that's the info I was looking for.
Thanks,
Steve
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43300
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #4 on: January 19, 2011, 02:01:42 PM »
I checked mine, 2.578" for the 180gr SSP(BC .248) which puts the bullet entirely out of the case. It's 2.300" for the 180gr Speer(BC .236), I've only shot the Speer loaded just off the lands.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline yoteskinner

  • Trade Count: (1)
  • Member
  • *
  • Posts: 13
Re: .357 Maximum Reamer
« Reply #5 on: January 19, 2011, 03:40:25 PM »
With the reamer I have, I seat the 180 SSP .100 longer than the cannelure and that leaves approx. .025-.035 to the lands.
Logged

Offline steve@357maximum.com

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #6 on: January 19, 2011, 03:58:18 PM »
Thanks for the info guys.  Yote, what you described is more what I am looking for.  Can you give me the details (part# etc.) of your reamer.  My current Ruger No. 1 .357 mag, rechamber to the Max was done by a local gunsmith and it sounds more like what Tim described.  My first Max. barrel was an MGM Encore where I asked for a short throat and with the 180 SSP seated to the cannelure, I was .025 off the lands.  I'm considering rechambering a second Ruger No. 1 but I want to get a handle on understanding reamer designs.  Tim, is it possible to ream the case dimensions separate from the throat, like in two steps so you can tailor the throat to whatever you desire in order to control bullet jump?  From what I have learned over the past few years, I would like to have a slightly longer C.O.L. but not extreme like I have now.
Thanks Again,
Steve
Logged

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: .357 Maximum Reamer
« Reply #7 on: January 19, 2011, 04:01:34 PM »
Steve,
  I have sent you a PM. ;)

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43300
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #8 on: January 19, 2011, 05:34:21 PM »
Quote from: steve@357maximum.com on January 19, 2011, 03:58:18 PM
Tim, is it possible to ream the case dimensions separate from the throat, like in two steps so you can tailor the throat to whatever you desire in order to control bullet jump?  From what I have learned over the past few years, I would like to have a slightly longer C.O.L. but not extreme like I have now.
Thanks Again,
Steve

I'm sure you could, but not likely with my reamer.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43300
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #9 on: January 19, 2011, 05:58:29 PM »
I take that back, read the review on the reamer at Midway.

Tim

http://www.midwayusa.com/viewProduct/?productNumber=734226

Quote
Excellent reamer will easily re-chamber a 357 Mag to a Maximum. True 6 deg ramp. You can chamber completely or stop when your target / hunting load touches the bore. I have re-chambered 3 Handi Rifles with this reamer and all three shoot excellent groups.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: .357 Maximum Reamer
« Reply #10 on: January 20, 2011, 12:39:26 AM »
Almost forgot, another member used the 357 Maxi reamer to lengthen his 357 Mag to 360 DW.  Said it worked fine and helped the accuracy.

EDIT, don't post before having first cup of coffee.   The other member had a 357 Mag that he build as a stub project, the barrel was from either a lever or bolt gun.  He ended up with a slightly short chamber that wouldn't accept a 357 MAG, he used the 357 maxi reamer to open up the chamber to 357 MAG.  Accuracy did improve over the 38 SPC he was shooting.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #11 on: January 20, 2011, 02:28:10 AM »
Steve, it's good to see you here.  Your website is on my favorites.  I believe the reamer has had over 50 rentals.  That's a lot for our little world of Handiholics.  A lot of trips back and forth to the P.O. for Tim.

My 16.5 inch maxi is my go to farm/truck/ slogging around out back rifle.  I'm trying to finish dialing in new glass for her, but at -5F this morning, it aint gonna happen again today.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #12 on: January 20, 2011, 03:34:32 AM »
C.E. Harris did a bunch of work on .357 Ruger's while he was with Ruger and came up with a very accurate throating reamer for problematic No.1s. I think I read about this some years back in magazine of The Cast Bullet Assoc. or an old Gun Digest??
I 'filed' that much in the nether regions of my mind for future reference anyway........
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Goatwhiskers

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 277
Re: .357 Maximum Reamer
« Reply #13 on: January 20, 2011, 03:42:40 AM »
Not aware if there is any difference in reamers, but I used one from cowboyup453 to open up a Martini Cadet that was 357mag.  Using the Hornady 180HPXTP I am limited to a max col of 2.020 to enter the chamber and do not touch the rifling at that length.  Tried 27gr of A1680 and show no signs of pressure, in fact still getting soot on the cases.  I have some 185gr and 200gr bullets ordered from Beartooth and will check again as a different contour may allow a longer length.  Goatwhiskers the Elder
Logged

Offline Slowhanddd

  • GBO Supporter
  • Trade Count: (43)
  • A Real Regular
  • *****
  • Posts: 691
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #14 on: January 20, 2011, 04:54:46 AM »
Hey Goat.what was your OAL on the bullets?If I load my 180 remy JHP at 1.990,i'm just barely compressing the powder with 26 grains.Also any oe have a decent load using 180 gr.LFN for the maxi.
Logged
Life is not about how fast you run, or how high you climb, but how well
you bounce

Offline Goatwhiskers

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 277
Re: .357 Maximum Reamer
« Reply #15 on: January 20, 2011, 05:05:09 AM »
Using the Hornady 180XTP (the only heavy bullet I have right now) length was 2.011". Chambers easily.  I tried loads from 25 to 27gr A1680, getting less soot as I went up and no signs of pressure.  Got groups from 1/2" to just under 3/4" but I'm not too excited at this point 'cause I'm 66 yrs old, in bifocals, and using Parker-Hale target sights.  Don't want to think about how long it's been since I shot iron sights.  Maybe I should be excited about those groups!  Forgot to say the 27gr load gave me 1865fps.  Goatwhiskers
Logged

Offline Slowhanddd

  • GBO Supporter
  • Trade Count: (43)
  • A Real Regular
  • *****
  • Posts: 691
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #16 on: January 20, 2011, 05:38:49 AM »
Thanks goat.I understand all to well about the iron sites.Don't know what distance your shooting those groups,but if I was shooting irons at 25 yds,I'd be jumping up and down.BTW,i'm only 60.Thanks for the info on your OAL.
Logged
Life is not about how fast you run, or how high you climb, but how well
you bounce

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: .357 Maximum Reamer
« Reply #17 on: January 20, 2011, 11:12:55 PM »
I also used the reamer from cowboyup and ended up with the OAL being 2.20 just off the lands.  Can't find AA1680 nearby so working on loads with LiL Gun and the 180 SSP bullets, so far so good.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline yoteskinner

  • Trade Count: (1)
  • Member
  • *
  • Posts: 13
Re: .357 Maximum Reamer
« Reply #18 on: January 24, 2011, 12:16:14 PM »
Steve, my reamer is a Clymer finishing reamer 357 Max (B) SAAMI SPEC MIN. CHAMBER
Logged
Pages: [1]   Go Up
« previous next »