« previous next »
Pages: [1]   Go Down

Author Topic: My new twins  (Read 1305 times)

0 Members and 1 Guest are viewing this topic.

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
My new twins
« on: January 13, 2011, 02:53:21 PM »
Well I got my set of twins, I picked up my 45lc to night to complete the set. I only had time to fire three rounds of 45 but I like the way it shoots I can't wait to sight it in and fire it for groups Sat. If I can figure out how to post photos I would.

Matt

Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #1 on: January 13, 2011, 03:14:46 PM »
Lets see if this works, here are the twins.

Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #2 on: January 13, 2011, 03:20:22 PM »
It worked
Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline spruce

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2248
  • Gender: Male
Re: My new twins
« Reply #3 on: January 14, 2011, 12:28:43 PM »
Nice looking rifles.

I believe you mentioned in another post that one was a Rossi and one was an EMF?  I've been pondering one of the '92 copies and just wondering how these two compare as far as quality.  Is the EMF made in Italy by Chiappa?
Logged

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #4 on: January 14, 2011, 04:50:01 PM »
Howdy Spruce;

Both are Rossi's the EMF was imported by them but I was told that they go over their rifles a little closer to make sure that the rifles meet their standers. Both of my rifles say that they were made in Brazil by Taurus, I am extremely happy with both of them. I am also impressed with the people and service at EMF, they were outstanding.
Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline spruce

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2248
  • Gender: Male
Re: My new twins
« Reply #5 on: January 15, 2011, 02:30:15 AM »
Thanks Matt.

Always nice to hear a report from someone who actually owns and shoots the guns as opposed to a test by some gunwriter who is worried about losing some ad money for his magazine!
Logged

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #6 on: January 15, 2011, 09:04:43 AM »
anytime spruce,

When I get a chance to shoot the 45 I will let you know how it shoots, With the 357 I can hit a 32oz bottle at 110yds (open sights) I haven't had a chance to sight in the 45 as yet.

Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #7 on: January 24, 2011, 12:51:44 AM »
spruce;

I thought you would like to know that I finely got a chance to sight in the 45lc. I think that it shoots fairly well once I got use to the sights I can hit a 12oz can at 100yds (not much left of the can). I do believe that it is going to be a fine deer rifle.

Matt   
Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: My new twins
« Reply #8 on: January 24, 2011, 09:14:12 AM »
A 12oz can at 100yrds with open sites is pretty darn good shooting.  Is that rested or off-hand?  Either way the deer in your part of the woods had better take notice.
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #9 on: January 27, 2011, 01:29:07 AM »
Brett;

That is rested (sand bag support). I am not use to using the half buckhorn rear sight so I had to learn how to use it and that along with sighting it in took about 75 to 100 rounds (I glad I roll my own) but after that it is fairly accurate. I am shooting a 300gr rpfn bullet and using 17.5gr of 2400 in rem. cases CCI LP primers. I am considering putting a tang or ladder sight on it to see if I can improve it any  better and maybe take it out a little longer, but we will see, I do like it so far and don't plain to get rid of it anytime soon.     
Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR

Offline spruce

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2248
  • Gender: Male
Re: My new twins
« Reply #10 on: January 27, 2011, 11:39:28 AM »
Matt - glad to hear it's working out for you.

Sounds like it's a keeper!
Logged

Offline mattbowen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: My new twins
« Reply #11 on: March 01, 2011, 01:56:46 PM »
Spruce;

Sorry it took so long to reply. I do think that both are keepers, I just can't wait to try them out hunting.
Logged
Draw Me Not Without reason, Sheath Me Not Without HONOR
Pages: [1]   Go Up
« previous next »