« previous next »
Pages: [1]   Go Down

Author Topic: finicky 10ga ejector  (Read 350 times)

0 Members and 1 Guest are viewing this topic.

Offline zackyholdem

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 188
finicky 10ga ejector
« on: March 20, 2011, 01:55:56 PM »
was patterning the 10ga pardner for turkey season and a few times it refused to eject the shell the first time i opened it, so i had to close it and open it hard and they ejected, is there anything i can do to remedy this? maybe a bit of oil? maybe a new sping? a thorough cleaning?

thanks Zack
Logged
When freedom shivers in the cold shadow of true peril, Its always the patriots who first hear the call. - Charlton Heston

Handi's -30-06, 223 Ultra, 7mm-08, 44 mag, 45-70, 17hmr, Tracker II 12ga, Pardner 10ga (2)12ga's and .410

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: finicky 10ga ejector
« Reply #1 on: March 20, 2011, 02:17:28 PM »
See the FAQs, take it apart, stone things a tad, try the BB trick,etc.
Also, carry something like a .45cal bullet with you to drop down the muzzle into a fired, sticky case; usually it will pop it right out. Fits the pocket or pack, DONT leave home without it.
BTW, I dont often have this happen with new, once fired, but more often with reloads.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »