Author Topic: Marlin model 36 locked up.  (Read 1502 times)

0 Members and 1 Guest are viewing this topic.

Offline nw_hunter

  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 5208
  • Gender: Male
Marlin model 36 locked up.
« on: April 12, 2011, 05:02:53 AM »
Took the old Marlin 36 (1946) to the range to try out the Leverevolution ammo. I loaded 3 into the mag. fired one, and when I attempted to eject, it locked in the open position. "No jam" The second round came up and I was able to extract it, and the third round is still in the magazine.

The lever is locked in the extended position ??? ???
This is the old square bolt Marlin, and my local gunsmith said he was unfamiliar with them, but would take a look at it.. Any Marlin owners on here that have had a similar problem to deal with?
Freedom Of Speech.....Once we lose it, every other freedom will follow.

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: Marlin model 36 locked up.
« Reply #1 on: April 12, 2011, 08:25:28 AM »
Despite the square bolt, they work pretty much the same as every other Marlin CF levergun - I would check the the loading gate isn't fouling the lifter, either from losing it's spring tension (buy a new one from Numrich) or a loose screw (disassemble & tighten).

Also, the locking bolt could be sticking in the "up" position, blocking the breechbolt's travel.

.
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Marlin model 36 locked up.
« Reply #2 on: April 12, 2011, 09:01:53 AM »
Sounds like the loading gate screw is loose.  Be careful not to over tighten it.  They break.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline nw_hunter

  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 5208
  • Gender: Male
Re: Marlin model 36 locked up.
« Reply #3 on: April 17, 2011, 08:21:14 PM »
Thanks for the info fellows! I had a guy look at it, and unlock it. He said it was pretty dirty and cleaned it up. I'll try it tomorrow and see how it performs.
Freedom Of Speech.....Once we lose it, every other freedom will follow.

Offline gstewart44

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1645
  • Gender: Male
Re: Marlin model 36 locked up.
« Reply #4 on: April 25, 2011, 10:34:51 AM »
Sounds like the loading gate screw is loose.  Be careful not to over tighten it.  They break.
that is exactly what happened to mine..... loose screw......  few turns of the screwdriver and it works like a charm.
I'm just tryin' to keep everything in balance, Woodrow. You do more work than you got to, so it's my obligation to do less. (Gus McCrae)