« previous next »
Pages: [1]   Go Down

Author Topic: Grip will not go on the gun  (Read 481 times)

0 Members and 1 Guest are viewing this topic.

Offline BassinElwood

  • Trade Count: (3)
  • Member
  • *
  • Posts: 34
Grip will not go on the gun
« on: April 27, 2011, 01:18:32 PM »
I just bought a new frame to build a 17 HMR and the grip that I have will not seat properly so I am thinking that I have an older model or differnet frame.  Basically the the screw and spring just below where the grip bolt screws into is blocking the grip from seating properly.  What is the problem and how do I solve it.....any help is appreciated..frame serial number is 289961

Elwood
Logged

Offline DEACONLLB

  • GBO Supporter
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 2458
  • Gender: Male
Re: Grip will not go on the gun
« Reply #1 on: April 27, 2011, 01:59:13 PM »
Check to see if you have a number of washers or spacers in the grip hole another thing, is the grip for contender or G2 if for G2 will not fit the contender frame. I bought a used grip that had at least 5 washers in the hole, you also need to make sure the grip bolt is not too long as it will keep the hammer from full cock.

Deaconllb
Logged
Korean war vet. NRA Member
Fourth fighter wing K14 Kimpo Korea 1952 Fourth but first, the mig killers.
533rd material ,air defense Oxnard AFB 1953-1955
Pastor of the  CBCG-Fellowship group Tulsa Oklahoma.

Offline BassinElwood

  • Trade Count: (3)
  • Member
  • *
  • Posts: 34
Re: Grip will not go on the gun
« Reply #2 on: April 27, 2011, 03:43:49 PM »
No washers and the grip came off of a G2....guessing that I need to get a regular Contender grip???????

Elwood
Logged

Offline DEACONLLB

  • GBO Supporter
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 2458
  • Gender: Male
Re: Grip will not go on the gun
« Reply #3 on: April 27, 2011, 05:03:54 PM »
That is the problem then as the G2 grip is at a different angle than the regular contender, some of the reg. contender forends will work on g2 but not all depends on shape but all the barrels interchange.

Deaconllb
Logged
Korean war vet. NRA Member
Fourth fighter wing K14 Kimpo Korea 1952 Fourth but first, the mig killers.
533rd material ,air defense Oxnard AFB 1953-1955
Pastor of the  CBCG-Fellowship group Tulsa Oklahoma.

Offline BassinElwood

  • Trade Count: (3)
  • Member
  • *
  • Posts: 34
Re: Grip will not go on the gun
« Reply #4 on: April 27, 2011, 05:50:18 PM »
Thanks for the help.....I have a WTB ad in the Contender section.

Elwood
Logged
Pages: [1]   Go Up
« previous next »